SM8450 UFS seems to use same sequence as SM8350, so reuse the sequence
from SM8450. Add the new clock list for this phy and the new compatible
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
Co-developed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 32 +++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 456a59d8c7d0..a959c97a699f 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -3091,6 +3091,10 @@ static const char * const qmp_v4_sm8250_usbphy_clk_l[] = {
"aux", "ref_clk_src", "com_aux"
};
+static const char * const sm8450_ufs_phy_clk_l[] = {
+ "qref", "ref", "ref_aux",
+};
+
static const char * const sdm845_ufs_phy_clk_l[] = {
"ref", "ref_aux",
};
@@ -4087,6 +4091,31 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
.pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
};
+static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8350_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
+ .tx_tbl = sm8350_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
+ .rx_tbl = sm8350_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
+ .pcs_tbl = sm8350_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
+ .clk_list = sm8450_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8150_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
.type = PHY_TYPE_USB3,
.nlanes = 1,
@@ -5745,6 +5774,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
}, {
.compatible = "qcom,sm8350-qmp-usb3-uni-phy",
.data = &sm8350_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-ufs-phy",
+ .data = &sm8450_ufsphy_cfg,
}, {
.compatible = "qcom,qcm2290-qmp-usb3-phy",
.data = &qcm2290_usb3phy_cfg,
--
2.31.1
