Add tlmm node found in SM8450 SoC and uart pin configuration
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 29 ++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index d838283bde4b..f0b9e80238a2 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -343,6 +343,8 @@ uart7: serial@99c000 {
reg = <0 0x0099c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart7_default_state>;
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -366,6 +368,33 @@ pdc: interrupt-controller@b220000 {
interrupt-controller;
};
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,sm8450-tlmm";
+ reg = <0 0x0f100000 0 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 211>;
+ wakeup-parent = <&pdc>;
+
+ qup_uart7_default_state: qup-uart3-default-state {
+ rx {
+ pins = "gpio26";
+ function = "qup7";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ tx {
+ pins = "gpio27";
+ function = "qup7";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+ };
+
intc: interrupt-controller@17100000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
--
2.31.1
