Re: [PATCH v6 08/10] ASoC: dt-bindings: Add SC7280 lpass cpu bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 11/28/2021 10:23 PM, Rob Herring wrote:
Thanks for Your Time Rob!!!
On Fri, Nov 26, 2021 at 05:34:40PM +0530, Srinivasa Rao Mandadapu wrote:
Add bindings for sc7280 lpass cpu driver which supports
audio over i2s based speaker, soundwire based headset, msm dmics
and HDMI Port.

Signed-off-by: Srinivasa Rao Mandadapu <srivasam@xxxxxxxxxxxxxx>
Co-developed-by: Venkata Prasad Potturu <potturu@xxxxxxxxxxxxxx>
Signed-off-by: Venkata Prasad Potturu <potturu@xxxxxxxxxxxxxx>
---
  .../devicetree/bindings/sound/qcom,lpass-cpu.yaml  | 69 +++++++++++++++++++---
  1 file changed, 61 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
index 1e23c0e..0f5a57c 100644
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
@@ -22,35 +22,36 @@ properties:
        - qcom,lpass-cpu
        - qcom,apq8016-lpass-cpu
        - qcom,sc7180-lpass-cpu
+      - qcom,sc7280-lpass-cpu
reg:
-    maxItems: 2
+    maxItems: 5
      description: LPAIF core registers
reg-names:
-    maxItems: 2
+    maxItems: 5
clocks:
      minItems: 3
-    maxItems: 6
+    maxItems: 7
clock-names:
      minItems: 3
-    maxItems: 6
+    maxItems: 7
interrupts:
-    maxItems: 2
+    maxItems: 4
      description: LPAIF DMA buffer interrupt
interrupt-names:
-    maxItems: 2
+    maxItems: 4
qcom,adsp:
      $ref: /schemas/types.yaml#/definitions/phandle
      description: Phandle for the audio DSP node
iommus:
-    maxItems: 2
+    maxItems: 3
      description: Phandle to apps_smmu node with sid mask
power-domains:
@@ -69,7 +70,7 @@ patternProperties:
    "^dai-link@[0-9a-f]$":
      type: object
      description: |
-      LPASS CPU dai node for each I2S device. Bindings of each node
+      LPASS CPU dai node for each I2S device or Soundwire device. Bindings of each node
        depends on the specific driver providing the functionality and
        properties.
      properties:
@@ -174,6 +175,58 @@ allOf:
          - iommus
          - power-domains
+ - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sc7280-lpass-cpu
+
+    then:
+      properties:
+        clock-names:
+          oneOf:
+            - items:   #for I2S
+                - const: lpass_aon_cc_audio_hm_h_clk
+                - const: lpass_core_cc_sysnoc_mport_core_clk
+                - const: lpass_core_cc_ext_if1_ibit_clk
+            - items:   #for Soundwire
+                - const: lpass_aon_cc_audio_hm_h_clk
+                - const: lpass_audio_cc_codec_mem0_clk
+                - const: lpass_audio_cc_codec_mem1_clk
+                - const: lpass_audio_cc_codec_mem2_clk
+            - items:   #for HDMI
+                - const: lpass_aon_cc_audio_hm_h_clk
'lpass_' and '_clk' are redundant.
Yes. but these clock names are defined by HW design team. clock drivers fallowed the same,  hence in audio drivers.

+
+        reg-names:
+          anyOf:
+            - items:   #for I2S
+                - const: lpass-lpaif
+            - items:   #for I2S and HDMI
+                - const: lpass-hdmiif
+                - const: lpass-lpaif
Doesn't this apply to other SoCs?

+            - items:   #for I2S, soundwire and HDMI
+                - const: lpass-cdc-lpm
+                - const: lpass-rxtx-lpaif
+                - const: lpass-va-lpaif
+                - const: lpass-hdmiif
+                - const: lpass-lpaif
'lpass-' is redundant too, but consistency across SoCs is better.

hdmiif and lpaif should be first. (Add new resources on the end.)
Okay.. order is maintained as per register addresses. if it's okay, even address range is out of order, will change accordingly.

+        interrupt-names:
+          anyOf:
+            - items:   #for I2S
+                - const: lpass-irq-lpaif
+            - items:   #for I2S and HDMI
+                - const: lpass-irq-lpaif
+                - const: lpass-irq-hdmi
+            - items:   #for I2S, soundwire and HDMI
+                - const: lpass-irq-lpaif
+                - const: lpass-irq-vaif
+                - const: lpass-irq-rxtxif
+                - const: lpass-irq-hdmi
Again, add new entries to the end.
 Replied above for the same.
+
+      required:
+        - iommus
+        - power-domains
+
  examples:
    - |
      #include <dt-bindings/sound/sc7180-lpass.h>
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.


--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux