This patch series adds secure domains support. If the non-secure DT property is not added to the domain fastrpc DT node, the domain is set as secure. If any process is getting initialized using non-secure device and the dsp channel is secure, then the session gets rejected. Jeya R (5): dt-bindings: misc: convert fastrpc bindings to yaml and add property misc: fastrpc: Add secure device node support misc: fastrpc: Set channel as secure misc: fastrpc: reject non-secure node for secure domain arm64: dts: qcom: add non-secure domain property to fastrpc nodes .../devicetree/bindings/misc/qcom,fastrpc.txt | 78 ----------------- .../devicetree/bindings/misc/qcom,fastrpc.yaml | 97 ++++++++++++++++++++++ arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 + arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 + arch/arm64/boot/dts/qcom/sm8150.dtsi | 3 + arch/arm64/boot/dts/qcom/sm8250.dtsi | 3 + arch/arm64/boot/dts/qcom/sm8350.dtsi | 3 + drivers/misc/fastrpc.c | 51 +++++++++++- 8 files changed, 158 insertions(+), 80 deletions(-) delete mode 100644 Documentation/devicetree/bindings/misc/qcom,fastrpc.txt create mode 100644 Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml -- 2.7.4
