Re: [PATCH v4 0/6] add fixes to pass DP Link Layer compliance test cases

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/08/2021 19:30, Kuogee Hsieh wrote:
drm/msm/dp: add fixes to pass DP Link Layer compliance test cases

Kuogee Hsieh (6):
   drm/msm/dp: use dp_ctrl_off_link_stream during PHY compliance test run
   drm/msm/dp: reduce link rate if failed at link training 1
   drm/msm/dp: reset aux controller after dp_aux_cmd_fifo_tx() failed.
   drm/msm/dp: replug event is converted into an unplug followed by an
     plug events
   drm/msm/dp: return correct edid checksum after corrupted edid checksum
     read
   drm/msm/dp: do not end dp link training until video is ready

  drivers/gpu/drm/msm/dp/dp_aux.c     |   3 +
  drivers/gpu/drm/msm/dp/dp_ctrl.c    | 137 +++++++++++++++++++++++-------------
  drivers/gpu/drm/msm/dp/dp_display.c |  14 ++--
  drivers/gpu/drm/msm/dp/dp_panel.c   |   9 ++-
  4 files changed, 102 insertions(+), 61 deletions(-)

Previous version of this patchset is already merged. If there are any changes on top of it, please submit the incremental diff/fixup.


--
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux