[PATCH net-next 2/2] net: ipa: support enhanced channel flow control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



IPA v4.2 introduced GSI channel flow control, used instead of IPA
endpoint DELAY mode to prevent a TX channel from injecting packets
into the IPA core.  It used a new FLOW_CONTROLLED channel state
which could be entered using GSI generic commands.

IPA v4.11 extended the channel flow control model.  Rather than
having a distinct FLOW_CONTROLLED channel state, each channel has a
"flow control" property that can be enabled or not--independent of
the channel state.  The AP (or modem) can modify this property using
the same GSI generic commands as before.

The AP only uses channel flow control on modem TX channels, and only
when recovering from a modem crash.  The AP has no way to discover
the state of a modem channel, so the fact that (starting with IPA
v4.11) flow control no longer uses a distinct channel state is
invisible to the AP.  So enhanced flow control generally does not
change the way AP uses flow control.

There are a few small differences, however:
  - There is a notion of "primary" or "secondary" flow control, and
    when enabling or disabling flow control that must be specified
    in a new field in the GSI generic command register.  For now, we
    always specify 0 (meaning "primary").
  - When disabling flow control, it's possible a request will need
    to be retried.  We retry up to 5 times in this case.
  - Another new generic command allows the current flow control
    state to be queried.  We do not use this.

Other than the need for retries, the code essentially works the same
way as before.

Signed-off-by: Alex Elder <elder@xxxxxxxxxx>
---
 drivers/net/ipa/gsi.c     | 20 ++++++++++++++++----
 drivers/net/ipa/gsi.h     |  2 +-
 drivers/net/ipa/gsi_reg.h |  2 ++
 3 files changed, 19 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ipa/gsi.c b/drivers/net/ipa/gsi.c
index 5f9e9fb501e7f..1125926367b2c 100644
--- a/drivers/net/ipa/gsi.c
+++ b/drivers/net/ipa/gsi.c
@@ -93,6 +93,7 @@
 
 #define GSI_CHANNEL_STOP_RETRIES	10
 #define GSI_CHANNEL_MODEM_HALT_RETRIES	10
+#define GSI_CHANNEL_MODEM_FLOW_RETRIES	5	/* disable flow control only */
 
 #define GSI_MHI_EVENT_ID_START		10	/* 1st reserved event id */
 #define GSI_MHI_EVENT_ID_END		16	/* Last reserved event id */
@@ -1658,7 +1659,8 @@ static void gsi_channel_teardown_one(struct gsi *gsi, u32 channel_id)
  * issue the command and wait for it to complete.
  */
 static int gsi_generic_command(struct gsi *gsi, u32 channel_id,
-			       enum gsi_generic_cmd_opcode opcode)
+			       enum gsi_generic_cmd_opcode opcode,
+			       u8 params)
 {
 	struct completion *completion = &gsi->completion;
 	bool timeout;
@@ -1685,6 +1687,7 @@ static int gsi_generic_command(struct gsi *gsi, u32 channel_id,
 	val = u32_encode_bits(opcode, GENERIC_OPCODE_FMASK);
 	val |= u32_encode_bits(channel_id, GENERIC_CHID_FMASK);
 	val |= u32_encode_bits(GSI_EE_MODEM, GENERIC_EE_FMASK);
+	val |= u32_encode_bits(params, GENERIC_PARAMS_FMASK);
 
 	timeout = !gsi_command(gsi, GSI_GENERIC_CMD_OFFSET, val, completion);
 
@@ -1703,7 +1706,7 @@ static int gsi_generic_command(struct gsi *gsi, u32 channel_id,
 static int gsi_modem_channel_alloc(struct gsi *gsi, u32 channel_id)
 {
 	return gsi_generic_command(gsi, channel_id,
-				   GSI_GENERIC_ALLOCATE_CHANNEL);
+				   GSI_GENERIC_ALLOCATE_CHANNEL, 0);
 }
 
 static void gsi_modem_channel_halt(struct gsi *gsi, u32 channel_id)
@@ -1713,7 +1716,7 @@ static void gsi_modem_channel_halt(struct gsi *gsi, u32 channel_id)
 
 	do
 		ret = gsi_generic_command(gsi, channel_id,
-					  GSI_GENERIC_HALT_CHANNEL);
+					  GSI_GENERIC_HALT_CHANNEL, 0);
 	while (ret == -EAGAIN && retries--);
 
 	if (ret)
@@ -1725,13 +1728,22 @@ static void gsi_modem_channel_halt(struct gsi *gsi, u32 channel_id)
 void
 gsi_modem_channel_flow_control(struct gsi *gsi, u32 channel_id, bool enable)
 {
+	u32 retries = 0;
 	u32 command;
 	int ret;
 
 	command = enable ? GSI_GENERIC_ENABLE_FLOW_CONTROL
 			 : GSI_GENERIC_DISABLE_FLOW_CONTROL;
+	/* Disabling flow control on IPA v4.11+ can return -EAGAIN if enable
+	 * is underway.  In this case we need to retry the command.
+	 */
+	if (!enable && gsi->version >= IPA_VERSION_4_11)
+		retries = GSI_CHANNEL_MODEM_FLOW_RETRIES;
+
+	do
+		ret = gsi_generic_command(gsi, channel_id, command, 0);
+	while (ret == -EAGAIN && retries--);
 
-	ret = gsi_generic_command(gsi, channel_id, command);
 	if (ret)
 		dev_err(gsi->dev,
 			"error %d %sabling mode channel %u flow control\n",
diff --git a/drivers/net/ipa/gsi.h b/drivers/net/ipa/gsi.h
index 41b3ab14c5124..5370a282a9f57 100644
--- a/drivers/net/ipa/gsi.h
+++ b/drivers/net/ipa/gsi.h
@@ -101,7 +101,7 @@ enum gsi_channel_state {
 	GSI_CHANNEL_STATE_STARTED		= 0x2,
 	GSI_CHANNEL_STATE_STOPPED		= 0x3,
 	GSI_CHANNEL_STATE_STOP_IN_PROC		= 0x4,
-	GSI_CHANNEL_STATE_FLOW_CONTROLLED	= 0x5,	/* IPA v4.2+ */
+	GSI_CHANNEL_STATE_FLOW_CONTROLLED	= 0x5,	/* IPA v4.2-v4.9 */
 	GSI_CHANNEL_STATE_ERROR			= 0xf,
 };
 
diff --git a/drivers/net/ipa/gsi_reg.h b/drivers/net/ipa/gsi_reg.h
index 4ab23998b3485..8906f4381032e 100644
--- a/drivers/net/ipa/gsi_reg.h
+++ b/drivers/net/ipa/gsi_reg.h
@@ -313,6 +313,7 @@ enum gsi_evt_cmd_opcode {
 #define GENERIC_OPCODE_FMASK		GENMASK(4, 0)
 #define GENERIC_CHID_FMASK		GENMASK(9, 5)
 #define GENERIC_EE_FMASK		GENMASK(13, 10)
+#define GENERIC_PARAMS_FMASK		GENMASK(31, 24)	/* IPA v4.11+ */
 
 /** enum gsi_generic_cmd_opcode - GENERIC_OPCODE field values in GENERIC_CMD */
 enum gsi_generic_cmd_opcode {
@@ -320,6 +321,7 @@ enum gsi_generic_cmd_opcode {
 	GSI_GENERIC_ALLOCATE_CHANNEL		= 0x2,
 	GSI_GENERIC_ENABLE_FLOW_CONTROL		= 0x3,	/* IPA v4.2+ */
 	GSI_GENERIC_DISABLE_FLOW_CONTROL	= 0x4,	/* IPA v4.2+ */
+	GSI_GENERIC_QUERY_FLOW_CONTROL		= 0x5,	/* IPA v4.11+ */
 };
 
 /* The next register is present for IPA v3.5.1 and above */
-- 
2.32.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux