Re: [PATCH 3/4] arm64: dts: qcom: sc7280: Define EC and H1 nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 23, 2021 at 12:30:12PM +0530, Rajendra Nayak wrote:

> Subject: arm64: dts: qcom: sc7280: Define EC and H1 nodes

that seems to suggest that EC and H1 nodes are something generic of the
sc7280, however these two chips are only present on systems that target
Chrome OS, and the specific nodes are added are only used by the QCA
sc7280 IDP and CRD, not other sc7280 boards using Chrome OS, like
herobrine. I suggest to change it to "arm64: dts: qcom: sc7280: Define
EC and H1 nodes for IDP/CRD".

> From: Kshitiz Godara <kgodara@xxxxxxxxxxxxxx>
> 
> The IDP2 and CRD boards share the EC and H1 parts, so define
> all related device nodes into a common file and include them
> in the idp2 and crd dts files to avoid duplication.
> 
> Signed-off-by: Kshitiz Godara <kgodara@xxxxxxxxxxxxxx>
> Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sc7280-crd.dts    |   1 +
>  arch/arm64/boot/dts/qcom/sc7280-ec-h1.dtsi | 110 +++++++++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/sc7280-idp2.dts   |   1 +
>  3 files changed, 112 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7280-ec-h1.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
> index 09d02c2..8c2aee6 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
> @@ -8,6 +8,7 @@
>  /dts-v1/;
>  
>  #include "sc7280-idp.dtsi"
> +#include "sc7280-ec-h1.dtsi"
>  
>  / {
>  	model = "Qualcomm Technologies, Inc. sc7280 CRD platform";
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-ec-h1.dtsi
> new file mode 100644
> index 0000000..78fb5eb
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-ec-h1.dtsi

Similar comment as for the subject, the file name seems to imply
that the include could be useful for any board with an EC and H1,
however it will be only used by the IDP and CRD. Maybe name it
'sc7280-idp-ec-h1.dtsi', from the CRD DT file it is alreay clear
that it is related with the IDP, so it shouldn't be too confusing
that the file name only says IDP.

Also a birdie told me that the EC and H1 configuration is going to
change in future revisions of the CRD, which is another reason for
being more specific with the file name (a sc7280-crd-ec-h1.dtsi
might be needed at that point, or the new not-any-longer-shared
config goes directly into the sc7280-crd-revN.dts.

> @@ -0,0 +1,110 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * sc7280 EC/H1 over SPI (common between IDP2 and CRD)
> + *
> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
> + */
> +
> +ap_ec_spi: &spi10 {
> +	status = "okay";
> +
> +	pinctrl-0 = <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>;

Shouldn't this also have <&qup_spi10_data_clk>?

> +	cs-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
> +
> +	cros_ec: ec@0 {
> +		compatible = "google,cros-ec-spi";
> +		reg = <0>;
> +		interrupt-parent = <&tlmm>;
> +		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&ap_ec_int_l>;
> +		spi-max-frequency = <3000000>;
> +
> +		cros_ec_pwm: ec-pwm {
> +			compatible = "google,cros-ec-pwm";
> +			#pwm-cells = <1>;
> +		};
> +
> +		i2c_tunnel: i2c-tunnel {
> +			compatible = "google,cros-ec-i2c-tunnel";
> +			google,remote-bus = <0>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};
> +
> +		typec {
> +			compatible = "google,cros-ec-typec";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			usb_c0: connector@0 {
> +				compatible = "usb-c-connector";
> +				reg = <0>;
> +				label = "left";
> +				power-role = "dual";
> +				data-role = "host";
> +				try-power-role = "source";
> +			};
> +
> +			usb_c1: connector@1 {
> +				compatible = "usb-c-connector";
> +				reg = <1>;
> +				label = "right";
> +				power-role = "dual";
> +				data-role = "host";
> +				try-power-role = "source";
> +			};
> +		};
> +	};
> +};
> +
> +#include <arm/cros-ec-keyboard.dtsi>
> +#include <arm/cros-ec-sbs.dtsi>
> +
> +ap_h1_spi: &spi14 {
> +	status = "okay";
> +
> +	pinctrl-0 = <&qup_spi14_cs_gpio_init_high>, <&qup_spi14_cs_gpio>;

<&qup_spi14_data_clk> missing?

> +	cs-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
> +
> +	cr50: tpm@0 {
> +		compatible = "google,cr50";
> +		reg = <0>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&h1_ap_int_odl>;
> +		spi-max-frequency = <800000>;
> +		interrupt-parent = <&tlmm>;
> +		interrupts = <104 IRQ_TYPE_EDGE_RISING>;
> +	};
> +};
> +
> +&tlmm {
> +	ap_ec_int_l: ap-ec-int-l {
> +		pins = "gpio18";
> +		function = "gpio";
> +		input-enable;
> +		bias-pull-up;
> +		drive-strength = <2>;

Is the explicit drive-strength setting actually needed?

Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml:

  drive-strength:
    enum: [2, 4, 6, 8, 10, 12, 14, 16]
    default: 2 <=
    description:
      Selects the drive strength for the specified pins, in mA.

The default is 2, hence it shouldn't be necessary it set it explicitly.

> +	};
> +
> +	h1_ap_int_odl: h1-ap-int-odl {
> +		pins = "gpio104";
> +		function = "gpio";
> +		input-enable;
> +		bias-pull-up;
> +		drive-strength = <2>;

see above

> +	};
> +
> +	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high {
> +		pins = "gpio43";
> +		output-high;
> +		drive-strength = <2>;

see above

> +	};
> +
> +	qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high {
> +		pins = "gpio59";
> +		output-high;
> +		drive-strength = <2>;

see above

> +	};
> +};
> +
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
> index 3ae9969..208ca69 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
> @@ -8,6 +8,7 @@
>  /dts-v1/;
>  
>  #include "sc7280-idp.dtsi"
> +#include "sc7280-ec-h1.dtsi"
>  
>  / {
>  	model = "Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform";



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux