We currently maintain a "disabled" Boolean flag to determine whether
the "ipa-setup-ready" SMP2P IRQ handler does anything. That flag
must be accessed under protection of a mutex.
Instead, disable the SMP2P interrupt when requested, which prevents
the interrupt handler from ever being called. More importantly, it
synchronizes a thread disabling the interrupt with the completion of
the interrupt handler in case they run concurrently.
Use the IPA setup_complete flag rather than the disabled flag in the
handler to determine whether to ignore any interrupts arriving after
the first.
Rename the "disabled" flag to be "setup_disabled", to be specific
about its purpose.
Fixes: 530f9216a953 ("soc: qcom: ipa: AP/modem communications")
Signed-off-by: Alex Elder <elder@xxxxxxxxxx>
---
drivers/net/ipa/ipa_smp2p.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ipa/ipa_smp2p.c b/drivers/net/ipa/ipa_smp2p.c
index df7639c39d716..24bc112a072c6 100644
--- a/drivers/net/ipa/ipa_smp2p.c
+++ b/drivers/net/ipa/ipa_smp2p.c
@@ -53,7 +53,7 @@
* @setup_ready_irq: IPA interrupt triggered by modem to signal GSI ready
* @power_on: Whether IPA power is on
* @notified: Whether modem has been notified of power state
- * @disabled: Whether setup ready interrupt handling is disabled
+ * @setup_disabled: Whether setup ready interrupt handler is disabled
* @mutex: Mutex protecting ready-interrupt/shutdown interlock
* @panic_notifier: Panic notifier structure
*/
@@ -67,7 +67,7 @@ struct ipa_smp2p {
u32 setup_ready_irq;
bool power_on;
bool notified;
- bool disabled;
+ bool setup_disabled;
struct mutex mutex;
struct notifier_block panic_notifier;
};
@@ -155,11 +155,9 @@ static irqreturn_t ipa_smp2p_modem_setup_ready_isr(int irq, void *dev_id)
struct device *dev;
int ret;
- mutex_lock(&smp2p->mutex);
-
- if (smp2p->disabled)
- goto out_mutex_unlock;
- smp2p->disabled = true; /* If any others arrive, ignore them */
+ /* Ignore any (spurious) interrupts received after the first */
+ if (smp2p->ipa->setup_complete)
+ return IRQ_HANDLED;
/* Power needs to be active for setup */
dev = &smp2p->ipa->pdev->dev;
@@ -176,8 +174,6 @@ static irqreturn_t ipa_smp2p_modem_setup_ready_isr(int irq, void *dev_id)
out_power_put:
pm_runtime_mark_last_busy(dev);
(void)pm_runtime_put_autosuspend(dev);
-out_mutex_unlock:
- mutex_unlock(&smp2p->mutex);
return IRQ_HANDLED;
}
@@ -322,7 +318,10 @@ void ipa_smp2p_disable(struct ipa *ipa)
mutex_lock(&smp2p->mutex);
- smp2p->disabled = true;
+ if (!smp2p->setup_disabled) {
+ disable_irq(smp2p->setup_ready_irq);
+ smp2p->setup_disabled = true;
+ }
mutex_unlock(&smp2p->mutex);
}
--
2.32.0
