On 20/11/2021 21:42, Dang Huynh wrote:
> Add most of the RPM PM660/PM660L regulators and the fixed ones,
> defining the common electrical part of this platform.
>
> Signed-off-by: Dang Huynh <danct12@xxxxxxxxxx>
> ---
> .../boot/dts/qcom/sdm660-xiaomi-lavender.dts | 266 ++++++++++++++++++
> 1 file changed, 266 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
> index 1edc53fd6941..eccbeecef192 100644
> --- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
> @@ -1,11 +1,14 @@
> // SPDX-License-Identifier: GPL-2.0-only
> /*
> * Copyright (c) 2020, Alexey Minnekhanov <alexey.min@xxxxxxxxx>
> + * Copyright (c) 2021, Dang Huynh <danct12@xxxxxxxxxx>
> */
>
> /dts-v1/;
>
> #include "sdm660.dtsi"
> +#include "pm660.dtsi"
> +#include "pm660l.dtsi"
>
> / {
> model = "Xiaomi Redmi Note 7";
> @@ -20,6 +23,16 @@ chosen {
> stdout-path = "serial0:115200n8";
> };
>
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> reserved-memory {
> #address-cells = <2>;
> #size-cells = <2>;
> @@ -40,6 +53,259 @@ &blsp1_uart2 {
> status = "okay";
> };
>
> +&rpm_requests {
> + pm660l-regulators {
> + compatible = "qcom,rpm-pm660l-regulators";
> +
> + vdd_s1-supply = <&vph_pwr>;
> + vdd_s2-supply = <&vph_pwr>;
> + vdd_s3_s4-supply = <&vph_pwr>;
> + vdd_s5-supply = <&vph_pwr>;
> + vdd_s6-supply = <&vph_pwr>;
> +
> + vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>;
> + vdd_l2-supply = <&vreg_bob>;
> + vdd_l3_l5_l7_l8-supply = <&vreg_bob>;
> + vdd_l4_l6-supply = <&vreg_bob>;
> + vdd_bob-supply = <&vph_pwr>;
> +
> + vreg_s1b_1p125: s1 {
> + regulator-min-microvolt = <1125000>;
> + regulator-max-microvolt = <1125000>;
> + regulator-enable-ramp-delay = <200>;
> + };
> +
> + vreg_s2b_1p05: s2 {
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1050000>;
> + regulator-enable-ramp-delay = <200>;
> + };
> +
> + /* LDOs */
> + vreg_l1b_0p925: l1 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <925000>;
> + regulator-enable-ramp-delay = <250>;
> + regulator-allow-set-load;
> + };
> +
> + /* SDHCI 3.3V signal doesn't seem to be supported. */
> + vreg_l2b_2p95: l2 {
> + regulator-min-microvolt = <1648000>;
> + regulator-max-microvolt = <2696000>;
> + regulator-enable-ramp-delay = <250>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l3b_3p3: l3 {
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <250>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l4b_2p95: l4 {
> + regulator-min-microvolt = <2944000>;
> + regulator-max-microvolt = <2952000>;
> + regulator-enable-ramp-delay = <250>;
> +
> + regulator-min-microamp = <200>;
> + regulator-max-microamp = <600000>;
> + regulator-system-load = <570000>;
> + regulator-allow-set-load;
> + };
> +
> + /*
> + * Downstream specifies a range of 1721-3600mV,
> + * but the only assigned consumers are SDHCI2 VMMC
> + * and Coresight QPDI that both request pinned 2.95V.
> + * Tighten the range to 1.8-3.328 (closest to 3.3) to
> + * make the mmc driver happy.
> + */
> + vreg_l5b_2p95: l5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3328000>;
> + regulator-enable-ramp-delay = <250>;
> + regulator-allow-set-load;
> + regulator-system-load = <800000>;
> + };
> +
> + vreg_l7b_3p125: l7 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <3125000>;
> + regulator-enable-ramp-delay = <250>;
> + };
> +
> + vreg_l8b_3p3: l8 {
> + regulator-min-microvolt = <3200000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-enable-ramp-delay = <250>;
> + };
> +
> + vreg_bob: bob {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3600000>;
> + regulator-enable-ramp-delay = <500>;
> + };
> + };
> +
> + pm660-regulators {
> + compatible = "qcom,rpm-pm660-regulators";
> +
> + vdd_s1-supply = <&vph_pwr>;
> + vdd_s2-supply = <&vph_pwr>;
> + vdd_s3-supply = <&vph_pwr>;
> + vdd_s4-supply = <&vph_pwr>;
> + vdd_s5-supply = <&vph_pwr>;
> + vdd_s6-supply = <&vph_pwr>;
> +
> + vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>;
> + vdd_l2_l3-supply = <&vreg_s2b_1p05>;
> + vdd_l5-supply = <&vreg_s2b_1p05>;
> + vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>;
> + vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>;
> +
> + /*
> + * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed
> + * by the Core Power Reduction hardened (CPRh) and the
> + * Operating State Manager (OSM) HW automatically.
> + */
> +
> + vreg_s4a_2p04: s4 {
> + regulator-min-microvolt = <1805000>;
> + regulator-max-microvolt = <2040000>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-always-on;
> + };
> +
> + vreg_s5a_1p35: s5 {
> + regulator-min-microvolt = <1224000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-enable-ramp-delay = <200>;
> + };
> +
> + vreg_s6a_0p87: s6 {
> + regulator-min-microvolt = <504000>;
> + regulator-max-microvolt = <992000>;
> + regulator-enable-ramp-delay = <150>;
> + };
> +
> + /* LDOs */
> + vreg_l1a_1p225: l1 {
> + regulator-min-microvolt = <1150000>;
> + regulator-max-microvolt = <1250000>;
> + regulator-enable-ramp-delay = <250>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l2a_1p0: l2 {
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1010000>;
> + regulator-enable-ramp-delay = <250>;
> + };
> +
> + vreg_l3a_1p0: l3 {
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1010000>;
> + regulator-enable-ramp-delay = <250>;
> + };
> +
> + vreg_l5a_0p848: l5 {
> + regulator-min-microvolt = <525000>;
> + regulator-max-microvolt = <950000>;
> + regulator-enable-ramp-delay = <250>;
> + };
> +
> + vreg_l6a_1p3: l6 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1370000>;
> + regulator-allow-set-load;
> + regulator-enable-ramp-delay = <250>;
> + };
> +
> + vreg_l7a_1p2: l7 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-enable-ramp-delay = <250>;
> + };
> +
> + vreg_l8a_1p8: l8 {
> + regulator-min-microvolt = <1750000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <250>;
> + regulator-system-load = <325000>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l9a_1p8: l9 {
> + regulator-min-microvolt = <1750000>;
> + regulator-max-microvolt = <1900000>;
> + regulator-enable-ramp-delay = <250>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l10a_1p8: l10 {
> + regulator-min-microvolt = <1780000>;
> + regulator-max-microvolt = <1950000>;
> + regulator-enable-ramp-delay = <250>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l11a_1p8: l11 {
> + regulator-min-microvolt = <1780000>;
> + regulator-max-microvolt = <1950000>;
> + regulator-enable-ramp-delay = <250>;
> + };
> +
> + vreg_l12a_1p8: l12 {
> + regulator-min-microvolt = <1780000>;
> + regulator-max-microvolt = <1950000>;
> + regulator-enable-ramp-delay = <250>;
> + };
> +
> + /* This gives power to the LPDDR4: never turn it off! */
> + vreg_l13a_1p8: l13 {
> + regulator-min-microvolt = <1780000>;
> + regulator-max-microvolt = <1950000>;
> + regulator-enable-ramp-delay = <250>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vreg_l14a_1p8: l14 {
> + regulator-min-microvolt = <1710000>;
> + regulator-max-microvolt = <1900000>;
> + regulator-enable-ramp-delay = <250>;
> + };
> +
> + vreg_l15a_1p8: l15 {
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <2950000>;
> + regulator-enable-ramp-delay = <250>;
> + };
> +
> + vreg_l16a_2p7: l16 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-enable-ramp-delay = <250>;
> + regulator-always-on;
> + };
> +
> + vreg_l17a_1p8: l17 {
> + regulator-min-microvolt = <1648000>;
> + regulator-max-microvolt = <2952000>;
> + regulator-enable-ramp-delay = <250>;
> + };
> +
> + vreg_l19a_3p3: l19 {
> + regulator-min-microvolt = <3312000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-enable-ramp-delay = <250>;
> + regulator-allow-set-load;
> + };
> + };
> +};
> +
> &tlmm {
> gpio-reserved-ranges = <8 4>;
> };
> --
> 2.33.1
>
Reviewed-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
--
Kind Regards,
Caleb
