Re: [v8 2/3] interconnect: qcom: Add EPSS L3 support on SC7280

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu 21 Oct 05:40 CDT 2021, Odelu Kukatla wrote:

> Add Epoch Subsystem (EPSS) L3 interconnect provider support on
> SC7280 SoCs.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

@Georgi, do you intend to apply the two interconnect patches in this
series?

Regards,
Bjorn

> Signed-off-by: Odelu Kukatla <okukatla@xxxxxxxxxxxxxx>
> ---
>  drivers/interconnect/qcom/osm-l3.c | 20 +++++++++++++++++++-
>  drivers/interconnect/qcom/sc7280.h |  2 ++
>  2 files changed, 21 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/interconnect/qcom/osm-l3.c b/drivers/interconnect/qcom/osm-l3.c
> index c7af143..eec1309 100644
> --- a/drivers/interconnect/qcom/osm-l3.c
> +++ b/drivers/interconnect/qcom/osm-l3.c
> @@ -1,6 +1,6 @@
>  // SPDX-License-Identifier: GPL-2.0
>  /*
> - * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
>   */
>  
>  #include <linux/bitfield.h>
> @@ -15,6 +15,7 @@
>  #include <dt-bindings/interconnect/qcom,osm-l3.h>
>  
>  #include "sc7180.h"
> +#include "sc7280.h"
>  #include "sc8180x.h"
>  #include "sdm845.h"
>  #include "sm8150.h"
> @@ -114,6 +115,22 @@ static const struct qcom_osm_l3_desc sc7180_icc_osm_l3 = {
>  	.reg_perf_state = OSM_REG_PERF_STATE,
>  };
>  
> +DEFINE_QNODE(sc7280_epss_apps_l3, SC7280_MASTER_EPSS_L3_APPS, 32, SC7280_SLAVE_EPSS_L3);
> +DEFINE_QNODE(sc7280_epss_l3, SC7280_SLAVE_EPSS_L3, 32);
> +
> +static const struct qcom_osm_l3_node *sc7280_epss_l3_nodes[] = {
> +	[MASTER_EPSS_L3_APPS] = &sc7280_epss_apps_l3,
> +	[SLAVE_EPSS_L3_SHARED] = &sc7280_epss_l3,
> +};
> +
> +static const struct qcom_osm_l3_desc sc7280_icc_epss_l3 = {
> +	.nodes = sc7280_epss_l3_nodes,
> +	.num_nodes = ARRAY_SIZE(sc7280_epss_l3_nodes),
> +	.lut_row_size = EPSS_LUT_ROW_SIZE,
> +	.reg_freq_lut = EPSS_REG_FREQ_LUT,
> +	.reg_perf_state = EPSS_REG_PERF_STATE,
> +};
> +
>  DEFINE_QNODE(sc8180x_osm_apps_l3, SC8180X_MASTER_OSM_L3_APPS, 32, SC8180X_SLAVE_OSM_L3);
>  DEFINE_QNODE(sc8180x_osm_l3, SC8180X_SLAVE_OSM_L3, 32);
>  
> @@ -326,6 +343,7 @@ static int qcom_osm_l3_probe(struct platform_device *pdev)
>  
>  static const struct of_device_id osm_l3_of_match[] = {
>  	{ .compatible = "qcom,sc7180-osm-l3", .data = &sc7180_icc_osm_l3 },
> +	{ .compatible = "qcom,sc7280-epss-l3", .data = &sc7280_icc_epss_l3 },
>  	{ .compatible = "qcom,sdm845-osm-l3", .data = &sdm845_icc_osm_l3 },
>  	{ .compatible = "qcom,sm8150-osm-l3", .data = &sm8150_icc_osm_l3 },
>  	{ .compatible = "qcom,sc8180x-osm-l3", .data = &sc8180x_icc_osm_l3 },
> diff --git a/drivers/interconnect/qcom/sc7280.h b/drivers/interconnect/qcom/sc7280.h
> index 175e400..1fb9839 100644
> --- a/drivers/interconnect/qcom/sc7280.h
> +++ b/drivers/interconnect/qcom/sc7280.h
> @@ -150,5 +150,7 @@
>  #define SC7280_SLAVE_PCIE_1			139
>  #define SC7280_SLAVE_QDSS_STM			140
>  #define SC7280_SLAVE_TCU			141
> +#define SC7280_MASTER_EPSS_L3_APPS		142
> +#define SC7280_SLAVE_EPSS_L3			143
>  
>  #endif
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux