Hi Tim, > the following is the explanation from qc btsoc team: > > The board ID should be split into two bytes. > The 1st byte is chip ID, and the 2nd byte is platform ID. > For example, board ID 0x010A, 0x01 is platform ID. 0x0A is chip ID. > Currently we have several platforms, and platform IDs are continuously added. > We would not distinguish different chips if we get these mixed up. > Platform ID: > • 0x00 is for Mobile > • 0x01 is for X86( ID # from 257) > • 0x02 is for Automotive(ID# from 513 ) > • 0x03 is for Consumer electronic( ID# from 769) > … then use u8 chip_id and u8 platform_id in the data structure and add description like above when you combine chip_id and platform_id into board_id. Regards Marcel
