[PATCH 08/16] arm64: dts: qcom: sm8350: Describe GCC dependency clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add all the clock names that the GCC driver expects to get via DT, so that the
clock handles can be filled as the development progresses.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 7e0aa4c25094..3d0d80e61405 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -584,8 +584,30 @@ gcc: clock-controller@100000 {
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
-			clock-names = "bi_tcxo", "sleep_clk";
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+			clock-names = "bi_tcxo",
+				      "sleep_clk",
+				      "pcie_0_pipe_clk",
+				      "pcie_1_pipe_clk",
+				      "ufs_card_rx_symbol_0_clk",
+				      "ufs_card_rx_symbol_1_clk",
+				      "ufs_card_tx_symbol_0_clk",
+				      "ufs_phy_rx_symbol_0_clk",
+				      "ufs_phy_rx_symbol_1_clk",
+				      "ufs_phy_tx_symbol_0_clk",
+				      "usb3_phy_wrapper_gcc_usb30_pipe_clk",
+				      "usb3_uni_phy_sec_gcc_usb30_pipe_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
 		};
 
 		ipcc: mailbox@408000 {
-- 
2.33.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux