Add support for SONY Xperia XZ2, XZ2 Compact and XZ3 smartphones, all based on the Qualcomm SDM845 chipset. There also exists a fourth Tama device, the XZ2 Premium (Aurora) with a 4K display, but it's relatively rare. The devices are affected by a scary UFS behaviour where sending a certain UFS command (which is worked around on downstream) renders the device unbootable, by effectively erasing the bootloader. Therefore UFS AND UFSPHY are strictly disabled for now. Downstream workaround: https://github.com/kholk/kernel/commit/2e7a9ee1c91a016baa0b826a7752ec45663a0561 This platform's bootloader is not very nice either. To boot mainline you need to flash a bogus DTBO (fastboot erasing may cut it, but it takes an inhumane amount of time) - one that's just 4 bytes (all zeroes) seems to work just fine. Of course, one can also provide a "normal" DTBO (device-specific DT overlayed on top of the SoC DT), but that's not yet supported by the mainline kernel build system. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx> Reviewed-by: Martin Botka <martin.botka@xxxxxxxxxxxxxx> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx> --- Changes since v1: - Grab R-bs - Add a compatible to gpio-keys and remove the currently-not-working CAM_FOCUS arch/arm64/boot/dts/qcom/Makefile | 3 + .../qcom/sdm845-sony-xperia-tama-akari.dts | 13 + .../qcom/sdm845-sony-xperia-tama-akatsuki.dts | 29 ++ .../qcom/sdm845-sony-xperia-tama-apollo.dts | 13 + .../dts/qcom/sdm845-sony-xperia-tama.dtsi | 438 ++++++++++++++++++ 5 files changed, 496 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 6b816eb33309..bc38b79f4b5b 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -91,6 +91,9 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-enchilada.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-akari.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-akatsuki.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-apollo.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts new file mode 100644 index 000000000000..34f84f1f1eb4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx> + */ + +/dts-v1/; + +#include "sdm845-sony-xperia-tama.dtsi" + +/ { + model = "Sony Xperia XZ2"; + compatible = "sony,akari-row", "qcom,sdm845"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts new file mode 100644 index 000000000000..8a0d94e7f598 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx> + */ + +/dts-v1/; + +#include "sdm845-sony-xperia-tama.dtsi" + +/ { + model = "Sony Xperia XZ3"; + compatible = "sony,akatsuki-row", "qcom,sdm845"; +}; + +/* For the future: WLED + LAB/IBB/OLEDB are not used on Akatsuki */ +&vreg_l14a_1p8 { + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <1840000>; +}; + +&vreg_l22a_2p8 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; + +&vreg_l28a_2p8 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts new file mode 100644 index 000000000000..c9e62c72f60e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx> + */ + +/dts-v1/; + +#include "sdm845-sony-xperia-tama.dtsi" + +/ { + model = "Sony Xperia XZ2 Compact"; + compatible = "sony,apollo-row", "qcom,sdm845"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi new file mode 100644 index 000000000000..281fe6dea62a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -0,0 +1,438 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx> + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sdm845.dtsi" +#include "pm8005.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/ { + qcom,msm-id = <321 0x20001>; /* SDM845 v2.1 */ + qcom,board-id = <8 0>; + + gpio-keys { + compatible = "gpio-keys"; + + /* Neither Camera Focus, nor Camera Shutter seem to work... */ + + vol-down { + label = "volume_down"; + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + gpio-key,wakeup; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + reserved-memory { + /* SONY was cool and didn't diverge from MTP this time, yay! */ + cont_splash_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2400000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x10000>; + console-size = <0x60000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + no-map; + }; + }; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_0p9>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p3>; + vdd-l3-l11-supply = <&vreg_s7a_0p9>; + vdd-l4-l5-supply = <&vreg_s7a_0p9>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l9-supply = <&vreg_s5a_1p9>; + vdd-l10-l23-l25-supply = <&src_vreg_bob>; + vdd-l13-l19-l21-supply = <&src_vreg_bob>; + vdd-l16-l28-supply = <&src_vreg_bob>; + vdd-l18-l22-supply = <&src_vreg_bob>; + vdd-l20-l24-supply = <&src_vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p3>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p1: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_s3a_1p3: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_1p9: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_0p9: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vreg_l1a_0p9: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p7: ldo9 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p7: ldo10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_1p0: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_1p8: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_2p7: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19a_2p7: ldo19 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + + /* + * The driver *really* doesn't want this regualtor to exist, + * saying that it could not get the current voltage (-ENOTRECOVERABLE) + * even though it surely is used on these devices (as a voltage + * source for camera autofocus) + */ + status = "disabled"; + }; + + vreg_l20a_2p7: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p7: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22a_2p8: ldo22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l23a_3p0: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l24a_3p1: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p0: ldo25 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_2p8: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + src_vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8005-rpmh-regulators { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + + /* Synaptics touchscreen @ 2c, 3c */ +}; + +&i2c10 { + status = "okay"; + clock-frequency = <400000>; + + /* Qcom SMB1355 @ 8, c */ + /* NXP PN547 NFC @ 28 */ + /* Renesas IDTP9221 Qi charger @ 61 */ +}; + +&i2c14 { + status = "okay"; + clock-frequency = <400000>; + + /* SONY ToF sensor @ 52 */ + /* AMS TCS3490 RGB+IR color sensor @ 72 */ +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&vreg_l21a_2p7>; + vqmmc-supply = <&vreg_l13a_1p8>; + cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&sdc2_default_state>; + pinctrl-names = "default"; + bus-width = <4>; + no-sdio; + no-emmc; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + sdc2_default_state: sdc2-default-state { + clk { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; +}; + +&uart6 { + status = "okay"; +}; + +&uart9 { + status = "okay"; +}; + +/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */ +&ufs_mem_hc { status = "disabled"; }; +&ufs_mem_phy { status = "disabled"; }; + +&usb_1 { + status = "okay"; + + qcom,select-utmi-as-pipe-clk; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; + + maximum-speed = "high-speed"; + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p9>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p1>; +}; -- 2.33.0
