Add most of the RPM PM660/PM660L regulators and the fixed ones,
defining the common electrical part of this platform.
Reviewed-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
Signed-off-by: Dang Huynh <danct12@xxxxxxxxxx>
---
.../boot/dts/qcom/sdm660-xiaomi-lavender.dts | 294 ++++++++++++++++++
1 file changed, 294 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
index 1edc53fd6941..365a03b56cde 100644
--- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
+++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
@@ -1,11 +1,14 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2020, Alexey Minnekhanov <alexey.min@xxxxxxxxx>
+ * Copyright (c) 2021, Dang Huynh <danct12@xxxxxxxxxx>
*/
/dts-v1/;
#include "sdm660.dtsi"
+#include "pm660.dtsi"
+#include "pm660l.dtsi"
/ {
model = "Xiaomi Redmi Note 7";
@@ -20,6 +23,14 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -40,6 +51,289 @@ &blsp1_uart2 {
status = "okay";
};
+&rpm_requests {
+ pm660l-regulators {
+ compatible = "qcom,rpm-pm660l-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+
+ vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>;
+ vdd_l2-supply = <&vreg_bob>;
+ vdd_l3_l5_l7_l8-supply = <&vreg_bob>;
+ vdd_l4_l6-supply = <&vreg_bob>;
+ vdd_bob-supply = <&vph_pwr>;
+
+ vreg_s1b_1p125: s1 {
+ regulator-min-microvolt = <1125000>;
+ regulator-max-microvolt = <1125000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_s2b_1p05: s2 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-ramp-delay = <0>;
+ };
+
+ /* LDOs */
+ vreg_l1b_0p925: l1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <925000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+
+ // SDHCI 3.3V signal doesn't seem to be supported.
+ vreg_l2b_2p95: l2 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <2696000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l3b_3p3: l3 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l4b_2p95: l4 {
+ regulator-min-microvolt = <2944000>;
+ regulator-max-microvolt = <2952000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+
+ regulator-min-microamp = <200>;
+ regulator-max-microamp = <600000>;
+ regulator-system-load = <570000>;
+ regulator-allow-set-load;
+ };
+
+ /*
+ * Downstream specifies a range of 1721-3600mV,
+ * but the only assigned consumers are SDHCI2 VMMC
+ * and Coresight QPDI that both request pinned 2.95V.
+ * Tighten the range to 1.8-3.328 (closest to 3.3) to
+ * make the mmc driver happy.
+ */
+ vreg_l5b_2p95: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3328000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ regulator-system-load = <800000>;
+ };
+
+ vreg_l7b_3p125: l7 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3125000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l8b_3p3: l8 {
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-enable-ramp-delay = <500>;
+ regulator-ramp-delay = <0>;
+ };
+ };
+
+ pm660-regulators {
+ compatible = "qcom,rpm-pm660-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+
+ vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>;
+ vdd_l2_l3-supply = <&vreg_s2b_1p05>;
+ vdd_l5-supply = <&vreg_s2b_1p05>;
+ vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>;
+ vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>;
+
+ /*
+ * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed
+ * by the Core Power Reduction hardened (CPRh) and the
+ * Operating State Manager (OSM) HW automatically.
+ */
+
+ vreg_s4a_2p04: s4 {
+ regulator-min-microvolt = <1805000>;
+ regulator-max-microvolt = <2040000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ };
+
+ vreg_s5a_1p35: s5 {
+ regulator-min-microvolt = <1224000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_s6a_0p87: s6 {
+ regulator-min-microvolt = <504000>;
+ regulator-max-microvolt = <992000>;
+ regulator-enable-ramp-delay = <150>;
+ regulator-ramp-delay = <0>;
+ };
+
+ /* LDOs */
+ vreg_l1a_1p225: l1 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l2a_1p0: l2 {
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1010000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l3a_1p0: l3 {
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1010000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l5a_0p848: l5 {
+ regulator-min-microvolt = <525000>;
+ regulator-max-microvolt = <950000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l6a_1p3: l6 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1370000>;
+ regulator-allow-set-load;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l7a_1p2: l7 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l8a_1p8: l8 {
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-system-load = <325000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l9a_1p8: l9 {
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l10a_1p8: l10 {
+ regulator-min-microvolt = <1780000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l11a_1p8: l11 {
+ regulator-min-microvolt = <1780000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l12a_1p8: l12 {
+ regulator-min-microvolt = <1780000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ /* This gives power to the LPDDR4: never turn it off! */
+ vreg_l13a_1p8: l13 {
+ regulator-min-microvolt = <1780000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vreg_l14a_1p8: l14 {
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l15a_1p8: l15 {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l16a_2p7: l16 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ };
+
+ vreg_l17a_1p8: l17 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <2952000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l19a_3p3: l19 {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+ };
+};
+
&tlmm {
gpio-reserved-ranges = <8 4>;
};
--
2.33.1
