Re: [PATCH] pinctrl: qcom: sdm845: Enable dual edge errata

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Mon, Nov 1, 2021 at 8:41 PM Bjorn Andersson
<bjorn.andersson@xxxxxxxxxx> wrote:
>
> It has been observed that dual edge triggered wakeirq GPIOs on SDM845
> doesn't trigger interrupts on the falling edge.
>
> Enabling wakeirq_dual_edge_errata for SDM845 indicates that the PDC in
> SDM845 suffers from the same problem described, and worked around, by
> Doug in 'c3c0c2e18d94 ("pinctrl: qcom: Handle broken/missing PDC dual
> edge IRQs on sc7180")', so enable the workaround for SDM845 as well.
>
> The specific problem seen without this is that gpio-keys does not detect
> the falling edge of the LID gpio on the Lenovo Yoga C630 and as such
> consistently reports the LID as closed.
>
> Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy")
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
>  drivers/pinctrl/qcom/pinctrl-sdm845.c | 1 +
>  1 file changed, 1 insertion(+)

Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux