[PATCH v9 4/5] usb: dwc3: qcom: Change the IRQ flag for DP/DM hs phy irq

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Change the IRQ flags for DP/DM hs phy irq to avoid interrupt
triggering during system suspend.

Signed-off-by: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
---
 drivers/usb/dwc3/dwc3-qcom.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 54461f1..356f4f8 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -473,7 +473,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
 		irq_set_status_flags(irq, IRQ_NOAUTOEN);
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 					qcom_dwc3_resume_irq,
-					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 					"qcom_dwc3 DP_HS", qcom);
 		if (ret) {
 			dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret);
@@ -488,7 +488,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
 		irq_set_status_flags(irq, IRQ_NOAUTOEN);
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 					qcom_dwc3_resume_irq,
-					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 					"qcom_dwc3 DM_HS", qcom);
 		if (ret) {
 			dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret);
-- 
2.7.4




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux