On Thu, Oct 28, 2021 at 05:49:39PM +0100, Bryan O'Donoghue wrote: > Add a YAML description for the pm8150b-tcpm driver. The pm8150b-tcpm > encapsulates a type-c block and a pdphy block into one block presented to > the tcpm Linux API. > > Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx> > --- > .../bindings/usb/qcom,pmic-tcpm.yaml | 110 ++++++++++++++++++ > 1 file changed, 110 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/qcom,pmic-tcpm.yaml > > diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-tcpm.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-tcpm.yaml > new file mode 100644 > index 0000000000000..6dd51a1dd944f > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/qcom,pmic-tcpm.yaml > @@ -0,0 +1,110 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/usb/qcom,pmic-tcpm.yaml#"; > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; > + > +title: Qualcomm PMIC TCPM Driver > + > +maintainers: > + - Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx> > + > +description: | > + Qualcomm PMIC Type-C Port Manager Driver > + > +properties: > + compatible: > + enum: > + - qcom,pm8150b-tcpm > + > + ports: > + description: Remote endpoint connections > + $ref: /connector/usb-connector.yaml#/properties/ports > + > + properties: > + port@0: > + description: Remote endpoints for the type-c device > + > + port@1: > + description: Remote endpoints for the pdphy device > + > + port@2: > + description: Connection to role switch node I don't understand these ports. The graph binding should be showing data stream connections. It should look something like a block diagram of the h/w components. > + > + required: > + - port@0 > + - port@1 > + - port@2 > + > +required: > + - compatible > + - ports > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/usb/pd.h> > + #include <dt-bindings/usb/typec/tcpm/qcom,pmic-usb-typec.h> > + #include <dt-bindings/usb/typec/tcpm/qcom,pmic-usb-pdphy.h> > + > + pm8150b_tcpm: pmic-tcpm { > + compatible = "qcom,pmic-tcpm"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + status = "disabled"; Not much point in having a disabled example. > + ports { > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + pmic_tcpm_typec: endpoint { > + remote-endpoint = <&pmic_typec>; > + }; > + }; > + port@1 { > + reg = <1>; > + pmic_tcpm_pdphy: endpoint { > + remote-endpoint = <&pmic_pdphy>; > + }; > + }; > + port@2 { > + ret = <2>; > + usb3_role: endpoint@0 { > + remote-endpoint = <&dwc3_drd_switch>; > + }; > + }; > + }; > + > + connector { > + compatible = "usb-c-connector"; > + > + power-role = "source"; > + data-role = "dual"; > + self-powered; > + > + source-pdos = <PDO_FIXED(5000, 3000, > + PDO_FIXED_DUAL_ROLE | > + PDO_FIXED_USB_COMM | > + PDO_FIXED_DATA_SWAP)>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + pmic_tcpm_ss_mux: endpoint@0 { > + remote-endpoint = <&qmp_ss_mux>; > + }; > + }; > + }; > + }; > + }; > + > +... > -- > 2.33.0 > >
