The following changes since commit 9304af37d07b63244e4b3c80e5a245c978beb015: dt-bindings: arm: qcom, add missing devices (2021-09-19 23:33:06 -0500) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-dts-for-5.16-2 for you to fetch changes up to 036e6c9f0336f50532ad6bedfaebf01856168a1d: ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node (2021-10-24 18:45:29 -0500) ---------------------------------------------------------------- Qualcomm DTS more changes for v5.16 The multi-purpose-pin (MPP) driver is finally migrated to use hierarchical IRQ domains, so this bring the associated changes. The remainder of the changes are correcting binding issues, primarily found through DT validation. ---------------------------------------------------------------- David Heidelberg (9): ARM: dts: qcom: mdm9615: fix memory node for Sierra Wireless WP8548 dt-bindings: arm: qcom-ipq4019: add missing device compatible ARM: dts: ipq4019-ap.dk01.1-c1: add device compatible in the dts dt-bindings: arm: qcom: Fix Nexus 4 vendor prefix ARM: dts: qcom: fix memory and mdio nodes naming for RB3011 ARM: dts: qcom: correct mmc node naming ARM: dts: qcom: fix flash node naming for RB3011 ARM: dts: qcom: fix thermal zones naming ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node Dmitry Baryshkov (14): ARM: dts: qcom-apq8064: stop using legacy clock names for HDMI ARM: dts: qcom-apq8064: add gpio-ranges to mpps nodes ARM: dts: qcom-msm8660: add gpio-ranges to mpps nodes ARM: dts: qcom-pm8841: add gpio-ranges to mpps nodes ARM: dts: qcom-pm8941: add gpio-ranges to mpps nodes ARM: dts: qcom-pma8084: add gpio-ranges to mpps nodes ARM: dts: qcom-mdm9615: add gpio-ranges to mpps node, fix its name ARM: dts: qcom-apq8060-dragonboard: fix mpps state names ARM: dts: qcom-apq8064: add interrupt controller properties ARM: dts: qcom-mdm9615: add interrupt controller properties ARM: dts: qcom-msm8660: add interrupt controller properties ARM: dts: qcom-pm8841: add interrupt controller properties ARM: dts: qcom-pm8941: add interrupt controller properties ARM: dts: qcom-pma8084: add interrupt controller properties Luca Weiss (2): dt-bindings: arm: qcom: rename vendor of apq8026-lenok ARM: dts: qcom: apq8026-lg-lenok: rename board vendor Shawn Guo (1): ARM: dts: qcom: sdx55: Drop '#clock-cells' from QMP PHY node Documentation/devicetree/bindings/arm/qcom.yaml | 5 ++- arch/arm/boot/dts/Makefile | 2 +- ...026-lge-lenok.dts => qcom-apq8026-lg-lenok.dts} | 2 +- arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 10 ++--- arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 2 +- arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 6 +-- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 6 +-- .../arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts | 4 +- arch/arm/boot/dts/qcom-apq8064.dtsi | 45 ++++++++-------------- arch/arm/boot/dts/qcom-apq8084.dtsi | 8 ++-- arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts | 2 +- arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 1 - arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 8 ++-- arch/arm/boot/dts/qcom-ipq8064.dtsi | 26 ++++++------- arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi | 2 +- arch/arm/boot/dts/qcom-mdm9615.dtsi | 16 +++----- arch/arm/boot/dts/qcom-msm8660-surf.dts | 4 +- arch/arm/boot/dts/qcom-msm8660.dtsi | 27 ++++--------- arch/arm/boot/dts/qcom-msm8960-cdp.dts | 4 +- arch/arm/boot/dts/qcom-msm8960.dtsi | 4 +- arch/arm/boot/dts/qcom-msm8974.dtsi | 12 +++--- arch/arm/boot/dts/qcom-pm8841.dtsi | 7 ++-- arch/arm/boot/dts/qcom-pm8941.dtsi | 11 ++---- arch/arm/boot/dts/qcom-pma8084.dtsi | 11 ++---- arch/arm/boot/dts/qcom-sdx55.dtsi | 1 - 25 files changed, 94 insertions(+), 132 deletions(-) rename arch/arm/boot/dts/{qcom-apq8026-lge-lenok.dts => qcom-apq8026-lg-lenok.dts} (99%)
