Re: [PATCH 3/8] clk: qcom: msm8996-cpu: Add MSM8996 Pro CBF support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu 14 Oct 03:32 CDT 2021, Yassine Oudjana wrote:

> MSM8996 Pro (MSM8996SG) has a few differences in the CBF clock.
> 

I think it would be nice if you described what those differences are.

Regards,
Bjorn

> Signed-off-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
> ---
> Dependencies:
> - clk: qcom: msm8996-cpu: Add CBF support
>   https://lore.kernel.org/linux-arm-msm/20210528192541.1120703-1-konrad.dybcio@xxxxxxxxxxxxxx/
> 
>  drivers/clk/qcom/clk-cpu-8996.c | 61 +++++++++++++++++++++------------
>  1 file changed, 40 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/clk/qcom/clk-cpu-8996.c b/drivers/clk/qcom/clk-cpu-8996.c
> index 8afc271f92d0..ab2acbe74f0f 100644
> --- a/drivers/clk/qcom/clk-cpu-8996.c
> +++ b/drivers/clk/qcom/clk-cpu-8996.c
> @@ -70,11 +70,11 @@ enum _pmux_input {
>  
>  enum {
>  	CBF_PLL_INDEX = 1,
> -	CBF_DIV_2_INDEX,
> +	CBF_DIV_INDEX,
>  	CBF_SAFE_INDEX
>  };
>  
> -#define DIV_2_THRESHOLD		600000000
> +#define DIV_THRESHOLD		600000000
>  #define PWRCL_REG_OFFSET 0x0
>  #define PERFCL_REG_OFFSET 0x80000
>  #define MUX_OFFSET	0x40
> @@ -142,6 +142,17 @@ static const struct alpha_pll_config cbfpll_config = {
>  	.early_output_mask = BIT(3),
>  };
>  
> +static const struct alpha_pll_config cbfpll_config_pro = {
> +	.l = 72,
> +	.config_ctl_val = 0x200d4aa8,
> +	.config_ctl_hi_val = 0x006,
> +	.pre_div_mask = BIT(12),
> +	.post_div_mask = 0x3 << 8,
> +	.post_div_val = 0x3 << 8,
> +	.main_output_mask = BIT(0),
> +	.early_output_mask = BIT(3),
> +};
> +
>  static struct clk_alpha_pll perfcl_pll = {
>  	.offset = PERFCL_REG_OFFSET,
>  	.regs = prim_pll_regs,
> @@ -230,7 +241,8 @@ struct clk_cpu_8996_mux {
>  	u8	width;
>  	struct notifier_block nb;
>  	struct clk_hw	*pll;
> -	struct clk_hw	*pll_div_2;
> +	struct clk_hw	*pll_div;
> +	u8 div;
>  	struct clk_regmap clkr;
>  };
>  
> @@ -280,11 +292,11 @@ static int clk_cpu_8996_mux_determine_rate(struct clk_hw *hw,
>  	struct clk_cpu_8996_mux *cpuclk = to_clk_cpu_8996_mux_hw(hw);
>  	struct clk_hw *parent = cpuclk->pll;
>  
> -	if (cpuclk->pll_div_2 && req->rate < DIV_2_THRESHOLD) {
> -		if (req->rate < (DIV_2_THRESHOLD / 2))
> +	if (cpuclk->pll_div &&req->rate < DIV_THRESHOLD) {
> +		if (req->rate < (DIV_THRESHOLD / cpuclk->div))
>  			return -EINVAL;
>  
> -		parent = cpuclk->pll_div_2;
> +		parent = cpuclk->pll_div;
>  	}
>  
>  	req->best_parent_rate = clk_hw_round_rate(parent, req->rate);
> @@ -336,7 +348,8 @@ static struct clk_cpu_8996_mux pwrcl_pmux = {
>  	.shift = 0,
>  	.width = 2,
>  	.pll = &pwrcl_pll.clkr.hw,
> -	.pll_div_2 = &pwrcl_smux.clkr.hw,
> +	.pll_div = &pwrcl_smux.clkr.hw,
> +	.div = 2,
>  	.nb.notifier_call = cpu_clk_notifier_cb,
>  	.clkr.hw.init = &(struct clk_init_data) {
>  		.name = "pwrcl_pmux",
> @@ -358,7 +371,8 @@ static struct clk_cpu_8996_mux perfcl_pmux = {
>  	.shift = 0,
>  	.width = 2,
>  	.pll = &perfcl_pll.clkr.hw,
> -	.pll_div_2 = &perfcl_smux.clkr.hw,
> +	.pll_div = &perfcl_smux.clkr.hw,
> +	.div = 2,
>  	.nb.notifier_call = cpu_clk_notifier_cb,
>  	.clkr.hw.init = &(struct clk_init_data) {
>  		.name = "perfcl_pmux",
> @@ -481,19 +495,23 @@ static int qcom_cbf_clk_msm8996_register_clks(struct device *dev,
>  					      struct regmap *regmap)
>  {
>  	int ret;
> +	bool is_pro = of_device_is_compatible(dev->of_node, "qcom,msm8996pro-apcc");
>  
> -	cbf_mux.pll_div_2 = clk_hw_register_fixed_factor(dev, "cbf_pll_main",
> -						      "cbf_pll", CLK_SET_RATE_PARENT,
> -						      1, 2);
> -	if (IS_ERR(cbf_mux.pll_div_2)) {
> +	cbf_mux.div = is_pro ? 4 : 2;
> +	cbf_mux.pll_div = clk_hw_register_fixed_factor(dev, "cbf_pll_main",
> +						       "cbf_pll", CLK_SET_RATE_PARENT,
> +						       1, cbf_mux.div);
> +
> +	if (IS_ERR(cbf_mux.pll_div)) {
>  		dev_err(dev, "Failed to initialize cbf_pll_main\n");
> -		return PTR_ERR(cbf_mux.pll_div_2);
> +		return PTR_ERR(cbf_mux.pll_div);
>  	}
>  
>  	ret = devm_clk_register_regmap(dev, cbf_msm8996_clks[0]);
>  	ret = devm_clk_register_regmap(dev, cbf_msm8996_clks[1]);
>  
> -	clk_alpha_pll_configure(&cbf_pll, regmap, &cbfpll_config);
> +	clk_alpha_pll_configure(&cbf_pll, regmap, is_pro ?
> +				&cbfpll_config_pro : &cbfpll_config);
>  	clk_set_rate(cbf_pll.clkr.hw.clk, 614400000);
>  	clk_prepare_enable(cbf_pll.clkr.hw.clk);
>  	clk_notifier_register(cbf_mux.clkr.hw.clk, &cbf_mux.nb);
> @@ -575,7 +593,7 @@ static int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event,
>  		qcom_cpu_clk_msm8996_acd_init(base);
>  		break;
>  	case POST_RATE_CHANGE:
> -		if (cnd->new_rate < DIV_2_THRESHOLD)
> +		if (cnd->new_rate < DIV_THRESHOLD)
>  			ret = clk_cpu_8996_mux_set_parent(&cpuclk->clkr.hw,
>  							  DIV_2_INDEX);
>  		else
> @@ -600,15 +618,15 @@ static int cbf_clk_notifier_cb(struct notifier_block *nb, unsigned long event,
>  
>  	switch (event) {
>  	case PRE_RATE_CHANGE:
> -		parent = clk_hw_get_parent_by_index(&cbfclk->clkr.hw, CBF_DIV_2_INDEX);
> -		ret = clk_cpu_8996_mux_set_parent(&cbfclk->clkr.hw, CBF_DIV_2_INDEX);
> +		parent = clk_hw_get_parent_by_index(&cbfclk->clkr.hw, CBF_DIV_INDEX);
> +		ret = clk_cpu_8996_mux_set_parent(&cbfclk->clkr.hw, CBF_DIV_INDEX);
>  
> -		if (cnd->old_rate > DIV_2_THRESHOLD && cnd->new_rate < DIV_2_THRESHOLD)
> -			ret = clk_set_rate(parent->clk, cnd->old_rate / 2);
> +		if (cnd->old_rate > DIV_THRESHOLD && cnd->new_rate < DIV_THRESHOLD)
> +			ret = clk_set_rate(parent->clk, cnd->old_rate / cbfclk->div);
>  		break;
>  	case POST_RATE_CHANGE:
> -		if (cnd->new_rate < DIV_2_THRESHOLD)
> -			ret = clk_cpu_8996_mux_set_parent(&cbfclk->clkr.hw, CBF_DIV_2_INDEX);
> +		if (cnd->new_rate < DIV_THRESHOLD)
> +			ret = clk_cpu_8996_mux_set_parent(&cbfclk->clkr.hw, CBF_DIV_INDEX);
>  		else {
>  			parent = clk_hw_get_parent_by_index(&cbfclk->clkr.hw, CBF_PLL_INDEX);
>  			ret = clk_set_rate(parent->clk, cnd->new_rate);
> @@ -676,6 +694,7 @@ static int qcom_cpu_clk_msm8996_driver_remove(struct platform_device *pdev)
>  
>  static const struct of_device_id qcom_cpu_clk_msm8996_match_table[] = {
>  	{ .compatible = "qcom,msm8996-apcc" },
> +	{ .compatible = "qcom,msm8996pro-apcc" },
>  	{}
>  };
>  MODULE_DEVICE_TABLE(of, qcom_cpu_clk_msm8996_match_table);
> -- 
> 2.33.0
> 
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux