[RFC PATCH 2/4] drm/i915/dp: Use DP 2.0 LINK_QUAL_PATTERN_* Phy test pattern definitions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Update selected phy test pattern names to use the new names/definitions of DPCD 248h in DP2.0/drm_dp_helpers.h
No functional changes

Cc: Manasi Navare <manasi.d.navare@xxxxxxxxx>
CC: Jani Nikula <jani.nikula@xxxxxxxxx>
Cc: Imre Deak <imre.deak@xxxxxxxxx>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@xxxxxxxxx>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index f5dc2126d140..931e8083e54a 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -3367,27 +3367,27 @@ static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp,
 	u32 pattern_val;
 
 	switch (data->phy_pattern) {
-	case DP_PHY_TEST_PATTERN_NONE:
+	case DP_LINK_QUAL_PATTERN_DISABLE:
 		DRM_DEBUG_KMS("Disable Phy Test Pattern\n");
 		intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 0x0);
 		break;
-	case DP_PHY_TEST_PATTERN_D10_2:
+	case DP_LINK_QUAL_PATTERN_D10_2:
 		DRM_DEBUG_KMS("Set D10.2 Phy Test Pattern\n");
 		intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
 			       DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_D10_2);
 		break;
-	case DP_PHY_TEST_PATTERN_ERROR_COUNT:
+	case DP_LINK_QUAL_PATTERN_ERROR_RATE:
 		DRM_DEBUG_KMS("Set Error Count Phy Test Pattern\n");
 		intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
 			       DDI_DP_COMP_CTL_ENABLE |
 			       DDI_DP_COMP_CTL_SCRAMBLED_0);
 		break;
-	case DP_PHY_TEST_PATTERN_PRBS7:
+	case DP_LINK_QUAL_PATTERN_PRBS7:
 		DRM_DEBUG_KMS("Set PRBS7 Phy Test Pattern\n");
 		intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
 			       DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_PRBS7);
 		break;
-	case DP_PHY_TEST_PATTERN_80BIT_CUSTOM:
+	case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM:
 		/*
 		 * FIXME: Ideally pattern should come from DPCD 0x250. As
 		 * current firmware of DPR-100 could not set it, so hardcoding
@@ -3404,7 +3404,7 @@ static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp,
 			       DDI_DP_COMP_CTL_ENABLE |
 			       DDI_DP_COMP_CTL_CUSTOM80);
 		break;
-	case DP_PHY_TEST_PATTERN_CP2520:
+	case DP_LINK_QUAL_PATTERN_CP2520_PAT_1:
 		/*
 		 * FIXME: Ideally pattern should come from DPCD 0x24A. As
 		 * current firmware of DPR-100 could not set it, so hardcoding
-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux