Re: [PATCH V2 3/3] arm64: dts: qcom: pm8350c: Add pwm support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Satya Priya (2021-10-19 03:48:51)
> From: satya priya <skakit@xxxxxxxxxxxxxx>
>
> Add pwm support for PM8350C pmic.
>
> Signed-off-by: satya priya <skakit@xxxxxxxxxxxxxx>
> ---
> Changes in V2:
>  - Dropped suffix '4' from pwm phandle and removed "status=ok".
>
>  arch/arm64/boot/dts/qcom/pm8350c.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
> index e1b75ae..08fc0a8 100644
> --- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
> @@ -29,6 +29,12 @@
>                         interrupt-controller;
>                         #interrupt-cells = <2>;
>                 };
> +
> +               pm8350c_pwm: pwm {
> +                       compatible = "qcom,pm8350c-pwm";

It should have a reg property. Every node should have a single cell for
the reg property because the parent has #address-cells = <1>

> +                       #pwm-cells = <2>;
> +                       status = "disabled";
> +               };
>         };



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux