Hi Vinod, I love your patch! Perhaps something to improve: [auto build test WARNING on broonie-spi/for-next] [also build test WARNING on v5.15-rc6 next-20211019] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch] url: https://github.com/0day-ci/linux/commits/Vinod-Koul/spi-spi-geni-qcom-Add-support-for-GPI-dma/20211019-140206 base: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next config: i386-buildonly-randconfig-r005-20211019 (attached as .config) compiler: clang version 14.0.0 (https://github.com/llvm/llvm-project b37efed957ed0a0193d80020aefd55cb587dfc1f) reproduce (this is a W=1 build): wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # https://github.com/0day-ci/linux/commit/4328916194e339d055a1d4c02170602b775ce334 git remote add linux-review https://github.com/0day-ci/linux git fetch --no-tags linux-review Vinod-Koul/spi-spi-geni-qcom-Add-support-for-GPI-dma/20211019-140206 git checkout 4328916194e339d055a1d4c02170602b775ce334 # save the attached .config to linux build tree COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 ARCH=i386 If you fix the issue, kindly add following tag as appropriate Reported-by: kernel test robot <lkp@xxxxxxxxx> All warnings (new ones prefixed by >>): >> drivers/spi/spi-geni-qcom.c:401:41: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand] peripheral.loopback_en = spi_slv->mode && SPI_LOOP; ^ ~~~~~~~~ drivers/spi/spi-geni-qcom.c:401:41: note: use '&' for a bitwise operation peripheral.loopback_en = spi_slv->mode && SPI_LOOP; ^~ & drivers/spi/spi-geni-qcom.c:401:41: note: remove constant to silence this warning peripheral.loopback_en = spi_slv->mode && SPI_LOOP; ~^~~~~~~~~~~ drivers/spi/spi-geni-qcom.c:402:44: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand] peripheral.clock_pol_high = spi_slv->mode && SPI_CPOL; ^ ~~~~~~~~ drivers/spi/spi-geni-qcom.c:402:44: note: use '&' for a bitwise operation peripheral.clock_pol_high = spi_slv->mode && SPI_CPOL; ^~ & drivers/spi/spi-geni-qcom.c:402:44: note: remove constant to silence this warning peripheral.clock_pol_high = spi_slv->mode && SPI_CPOL; ~^~~~~~~~~~~ 2 warnings generated. vim +401 drivers/spi/spi-geni-qcom.c 365 366 static int setup_gsi_xfer(struct spi_transfer *xfer, struct spi_geni_master *mas, 367 struct spi_device *spi_slv, struct spi_master *spi) 368 { 369 unsigned long flags = DMA_PREP_INTERRUPT | DMA_CTRL_ACK; 370 struct dma_slave_config config = {}; 371 struct gpi_spi_config peripheral = {}; 372 struct dma_async_tx_descriptor *tx_desc, *rx_desc; 373 int ret; 374 375 config.peripheral_config = &peripheral; 376 config.peripheral_size = sizeof(peripheral); 377 peripheral.set_config = true; 378 379 if (xfer->bits_per_word != mas->cur_bits_per_word || 380 xfer->speed_hz != mas->cur_speed_hz) { 381 mas->cur_bits_per_word = xfer->bits_per_word; 382 mas->cur_speed_hz = xfer->speed_hz; 383 } 384 385 if (xfer->tx_buf && xfer->rx_buf) { 386 peripheral.cmd = SPI_DUPLEX; 387 } else if (xfer->tx_buf) { 388 peripheral.cmd = SPI_TX; 389 peripheral.rx_len = 0; 390 } else if (xfer->rx_buf) { 391 peripheral.cmd = SPI_RX; 392 if (!(mas->cur_bits_per_word % MIN_WORD_LEN)) { 393 peripheral.rx_len = ((xfer->len << 3) / mas->cur_bits_per_word); 394 } else { 395 int bytes_per_word = (mas->cur_bits_per_word / BITS_PER_BYTE) + 1; 396 397 peripheral.rx_len = (xfer->len / bytes_per_word); 398 } 399 } 400 > 401 peripheral.loopback_en = spi_slv->mode && SPI_LOOP; 402 peripheral.clock_pol_high = spi_slv->mode && SPI_CPOL; 403 peripheral.data_pol_high = spi_slv->mode && SPI_CPHA; 404 peripheral.cs = spi_slv->chip_select; 405 peripheral.pack_en = true; 406 peripheral.word_len = xfer->bits_per_word - MIN_WORD_LEN; 407 408 ret = get_spi_clk_cfg(mas->cur_speed_hz, mas, 409 &peripheral.clk_src, &peripheral.clk_div); 410 if (ret) { 411 dev_err(mas->dev, "Err in get_spi_clk_cfg() :%d\n", ret); 412 return ret; 413 } 414 415 if (!xfer->cs_change) { 416 if (!list_is_last(&xfer->transfer_list, &spi->cur_msg->transfers)) 417 peripheral.fragmentation = FRAGMENTATION; 418 } 419 420 if (peripheral.cmd & SPI_RX) { 421 dmaengine_slave_config(mas->rx, &config); 422 rx_desc = dmaengine_prep_slave_sg(mas->rx, xfer->rx_sg.sgl, xfer->rx_sg.nents, 423 DMA_DEV_TO_MEM, flags); 424 if (!rx_desc) { 425 dev_err(mas->dev, "Err setting up rx desc\n"); 426 return -EIO; 427 } 428 } 429 430 /* 431 * Prepare the TX always, even for RX or tx_buf being null, we would 432 * need TX to be prepared per GSI spec 433 */ 434 dmaengine_slave_config(mas->tx, &config); 435 tx_desc = dmaengine_prep_slave_sg(mas->tx, xfer->tx_sg.sgl, xfer->tx_sg.nents, 436 DMA_MEM_TO_DEV, flags); 437 if (!tx_desc) { 438 dev_err(mas->dev, "Err setting up tx desc\n"); 439 return -EIO; 440 } 441 442 tx_desc->callback_result = spi_gsi_callback_result; 443 tx_desc->callback_param = spi; 444 445 if (peripheral.cmd & SPI_RX) 446 dmaengine_submit(rx_desc); 447 dmaengine_submit(tx_desc); 448 449 if (peripheral.cmd & SPI_RX) 450 dma_async_issue_pending(mas->rx); 451 452 dma_async_issue_pending(mas->tx); 453 return 1; 454 } 455 --- 0-DAY CI Kernel Test Service, Intel Corporation https://lists.01.org/hyperkitty/list/kbuild-all@xxxxxxxxxxxx
Attachment:
.config.gz
Description: application/gzip
