Re: [PATCH v12 2/5] soc: qcom: Add Sleep stats driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Maulik,

On Wed, Oct 13, 2021 at 12:08:21PM +0530, Maulik Shah wrote:
> From: Mahesh Sivasubramanian <msivasub@xxxxxxxxxxxxxx>
> 
> Let's add a driver to read the stats from remote processor and
> export to debugfs.
> 
> The driver creates "qcom_sleep_stats" directory in debugfs and
> adds files for various low power mode available. Below is sample
> output with command
> 
> cat /sys/kernel/debug/qcom_sleep_stats/ddr
> count = 0
> Last Entered At = 0
> Last Exited At = 0
> Accumulated Duration = 0
> 
> Signed-off-by: Mahesh Sivasubramanian <msivasub@xxxxxxxxxxxxxx>
> Signed-off-by: Lina Iyer <ilina@xxxxxxxxxxxxxx>
> [mkshah: add subsystem sleep stats, create one file for each stat]
> Signed-off-by: Maulik Shah <mkshah@xxxxxxxxxxxxxx>
> ---
>  drivers/soc/qcom/Kconfig      |  10 ++
>  drivers/soc/qcom/Makefile     |   1 +
>  drivers/soc/qcom/qcom_stats.c | 277 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 288 insertions(+)
>  create mode 100644 drivers/soc/qcom/qcom_stats.c
> 
> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> index abfef20..3cf3a6b 100644
> --- a/drivers/soc/qcom/Kconfig
> +++ b/drivers/soc/qcom/Kconfig
> @@ -199,6 +199,16 @@ config QCOM_SPM
>  	  to manage cores, L2 low power modes and to configure the internal
>  	  Adaptive Voltage Scaler parameters, where supported.
>  
> +config QCOM_STATS
> +	tristate "Qualcomm Technologies, Inc. (QTI) Sleep stats driver"
> +	depends on (ARCH_QCOM && DEBUG_FS) || COMPILE_TEST
> +	depends on QCOM_SMEM
> +	help
> +	  Qualcomm Technologies, Inc. (QTI) Sleep stats driver to read
> +	  the shared memory exported by the remote processor related to
> +	  various SoC level low power modes statistics and export to debugfs
> +	  interface.
> +
>  config QCOM_WCNSS_CTRL
>  	tristate "Qualcomm WCNSS control driver"
>  	depends on ARCH_QCOM || COMPILE_TEST
> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
> index 24514c7..70d5de6 100644
> --- a/drivers/soc/qcom/Makefile
> +++ b/drivers/soc/qcom/Makefile
> @@ -21,6 +21,7 @@ obj-$(CONFIG_QCOM_SMP2P)	+= smp2p.o
>  obj-$(CONFIG_QCOM_SMSM)	+= smsm.o
>  obj-$(CONFIG_QCOM_SOCINFO)	+= socinfo.o
>  obj-$(CONFIG_QCOM_SPM)		+= spm.o
> +obj-$(CONFIG_QCOM_STATS)	+= qcom_stats.o
>  obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
>  obj-$(CONFIG_QCOM_APR) += apr.o
>  obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o
> diff --git a/drivers/soc/qcom/qcom_stats.c b/drivers/soc/qcom/qcom_stats.c
> new file mode 100644
> index 0000000..817505b
> --- /dev/null
> +++ b/drivers/soc/qcom/qcom_stats.c
> @@ -0,0 +1,277 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2011-2021, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/debugfs.h>
> +#include <linux/device.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/seq_file.h>
> +
> +#include <linux/soc/qcom/smem.h>
> +#include <clocksource/arm_arch_timer.h>
> +
> +#define RPM_DYNAMIC_ADDR	0x14
> +#define RPM_DYNAMIC_ADDR_MASK	0xFFFF
> +
> +#define STAT_TYPE_OFFSET	0x0
> +#define COUNT_OFFSET		0x4
> +#define LAST_ENTERED_AT_OFFSET	0x8
> +#define LAST_EXITED_AT_OFFSET	0x10
> +#define ACCUMULATED_OFFSET	0x18
> +#define CLIENT_VOTES_OFFSET	0x1c

>From downstream 'struct msm_rpm_stats_data' [1], it looks that
CLIENT_VOTES_OFFSET should be 0x20?

Shawn

[1] https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/soc/qcom/rpm_stats.c?h=kernel.lnx.4.19.r17-rel#n46

> +
> +struct subsystem_data {
> +	const char *name;
> +	u32 smem_item;
> +	u32 pid;
> +};
> +
> +static const struct subsystem_data subsystems[] = {
> +	{ "modem", 605, 1 },
> +	{ "wpss", 605, 13 },
> +	{ "adsp", 606, 2 },
> +	{ "cdsp", 607, 5 },
> +	{ "slpi", 608, 3 },
> +	{ "gpu", 609, 0 },
> +	{ "display", 610, 0 },
> +	{ "adsp_island", 613, 2 },
> +	{ "slpi_island", 613, 3 },
> +};
> +
> +struct stats_config {
> +	size_t stats_offset;
> +	size_t num_records;
> +	bool appended_stats_avail;
> +	bool dynamic_offset;
> +	bool subsystem_stats_in_smem;
> +};
> +
> +struct stats_data {
> +	bool appended_stats_avail;
> +	void __iomem *base;
> +};
> +
> +struct sleep_stats {
> +	u32 stat_type;
> +	u32 count;
> +	u64 last_entered_at;
> +	u64 last_exited_at;
> +	u64 accumulated;
> +};
> +
> +struct appended_stats {
> +	u32 client_votes;
> +	u32 reserved[3];
> +};
> +
> +static void qcom_print_stats(struct seq_file *s, const struct sleep_stats *stat)
> +{
> +	u64 accumulated = stat->accumulated;
> +	/*
> +	 * If a subsystem is in sleep when reading the sleep stats adjust
> +	 * the accumulated sleep duration to show actual sleep time.
> +	 */
> +	if (stat->last_entered_at > stat->last_exited_at)
> +		accumulated += arch_timer_read_counter() - stat->last_entered_at;
> +
> +	seq_printf(s, "Count: %u\n", stat->count);
> +	seq_printf(s, "Last Entered At: %llu\n", stat->last_entered_at);
> +	seq_printf(s, "Last Exited At: %llu\n", stat->last_exited_at);
> +	seq_printf(s, "Accumulated Duration: %llu\n", accumulated);
> +}
> +
> +static int qcom_subsystem_sleep_stats_show(struct seq_file *s, void *unused)
> +{
> +	struct subsystem_data *subsystem = s->private;
> +	struct sleep_stats *stat;
> +
> +	/* Items are allocated lazily, so lookup pointer each time */
> +	stat = qcom_smem_get(subsystem->pid, subsystem->smem_item, NULL);
> +	if (IS_ERR(stat))
> +		return -EIO;
> +
> +	qcom_print_stats(s, stat);
> +
> +	return 0;
> +}
> +
> +static int qcom_soc_sleep_stats_show(struct seq_file *s, void *unused)
> +{
> +	struct stats_data *d = s->private;
> +	void __iomem *reg = d->base;
> +	struct sleep_stats stat;
> +
> +	memcpy_fromio(&stat, reg, sizeof(stat));
> +	qcom_print_stats(s, &stat);
> +
> +	if (d->appended_stats_avail) {
> +		struct appended_stats votes;
> +
> +		memcpy_fromio(&votes, reg + CLIENT_VOTES_OFFSET, sizeof(votes));
> +		seq_printf(s, "Client Votes: %#x\n", votes.client_votes);
> +	}
> +
> +	return 0;
> +}
> +
> +DEFINE_SHOW_ATTRIBUTE(qcom_soc_sleep_stats);
> +DEFINE_SHOW_ATTRIBUTE(qcom_subsystem_sleep_stats);
> +
> +static void qcom_create_soc_sleep_stat_files(struct dentry *root, void __iomem *reg,
> +					     struct stats_data *d,
> +					     const struct stats_config *config)
> +{
> +	char stat_type[sizeof(u32) + 1] = {0};
> +	size_t stats_offset = config->stats_offset;
> +	u32 offset = 0, type;
> +	int i, j;
> +
> +	/*
> +	 * On RPM targets, stats offset location is dynamic and changes from target
> +	 * to target and sometimes from build to build for same target.
> +	 *
> +	 * In such cases the dynamic address is present at 0x14 offset from base
> +	 * address in devicetree. The last 16bits indicates the stats_offset.
> +	 */
> +	if (config->dynamic_offset) {
> +		stats_offset = readl(reg + RPM_DYNAMIC_ADDR);
> +		stats_offset &= RPM_DYNAMIC_ADDR_MASK;
> +	}
> +
> +	for (i = 0; i < config->num_records; i++) {
> +		d[i].base = reg + offset + stats_offset;
> +
> +		/*
> +		 * Read the low power mode name and create debugfs file for it.
> +		 * The names read could be of below,
> +		 * (may change depending on low power mode supported).
> +		 * For rpmh-sleep-stats: "aosd", "cxsd" and "ddr".
> +		 * For rpm-sleep-stats: "vmin" and "vlow".
> +		 */
> +		type = readl(d[i].base);
> +		for (j = 0; j < sizeof(u32); j++) {
> +			stat_type[j] = type & 0xff;
> +			type = type >> 8;
> +		}
> +		strim(stat_type);
> +		debugfs_create_file(stat_type, 0400, root, &d[i],
> +				    &qcom_soc_sleep_stats_fops);
> +
> +		offset += sizeof(struct sleep_stats);
> +		if (d[i].appended_stats_avail)
> +			offset += sizeof(struct appended_stats);
> +	}
> +}
> +
> +static void qcom_create_subsystem_stat_files(struct dentry *root,
> +					     const struct stats_config *config)
> +{
> +	const struct sleep_stats *stat;
> +	int i;
> +
> +	if (!config->subsystem_stats_in_smem)
> +		return;
> +
> +	for (i = 0; i < ARRAY_SIZE(subsystems); i++) {
> +		stat = qcom_smem_get(subsystems[i].pid, subsystems[i].smem_item, NULL);
> +		if (IS_ERR(stat))
> +			continue;
> +
> +		debugfs_create_file(subsystems[i].name, 0400, root, (void *)&subsystems[i],
> +				    &qcom_subsystem_sleep_stats_fops);
> +	}
> +}
> +
> +static int qcom_stats_probe(struct platform_device *pdev)
> +{
> +	void __iomem *reg;
> +	struct dentry *root;
> +	const struct stats_config *config;
> +	struct stats_data *d;
> +	int i;
> +
> +	config = device_get_match_data(&pdev->dev);
> +	if (!config)
> +		return -ENODEV;
> +
> +	reg = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
> +	if (IS_ERR(reg))
> +		return -ENOMEM;
> +
> +	d = devm_kcalloc(&pdev->dev, config->num_records,
> +			 sizeof(*d), GFP_KERNEL);
> +	if (!d)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < config->num_records; i++)
> +		d[i].appended_stats_avail = config->appended_stats_avail;
> +
> +	root = debugfs_create_dir("qcom_stats", NULL);
> +
> +	qcom_create_subsystem_stat_files(root, config);
> +	qcom_create_soc_sleep_stat_files(root, reg, d, config);
> +
> +	platform_set_drvdata(pdev, root);
> +
> +	return 0;
> +}
> +
> +static int qcom_stats_remove(struct platform_device *pdev)
> +{
> +	struct dentry *root = platform_get_drvdata(pdev);
> +
> +	debugfs_remove_recursive(root);
> +
> +	return 0;
> +}
> +
> +static const struct stats_config rpm_data = {
> +	.stats_offset = 0,
> +	.num_records = 2,
> +	.appended_stats_avail = true,
> +	.dynamic_offset = true,
> +	.subsystem_stats_in_smem = false,
> +};
> +
> +static const struct stats_config rpmh_data = {
> +	.stats_offset = 0x48,
> +	.num_records = 3,
> +	.appended_stats_avail = false,
> +	.dynamic_offset = false,
> +	.subsystem_stats_in_smem = true,
> +};
> +
> +static const struct of_device_id qcom_stats_table[] = {
> +	{ .compatible = "qcom,rpm-stats", .data = &rpm_data },
> +	{ .compatible = "qcom,rpmh-stats", .data = &rpmh_data },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, qcom_stats_table);
> +
> +static struct platform_driver qcom_stats = {
> +	.probe = qcom_stats_probe,
> +	.remove = qcom_stats_remove,
> +	.driver = {
> +		.name = "qcom_stats",
> +		.of_match_table = qcom_stats_table,
> +	},
> +};
> +
> +static int __init qcom_stats_init(void)
> +{
> +	return platform_driver_register(&qcom_stats);
> +}
> +late_initcall(qcom_stats_init);
> +
> +static void __exit qcom_stats_exit(void)
> +{
> +	platform_driver_unregister(&qcom_stats);
> +}
> +module_exit(qcom_stats_exit)
> +
> +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. (QTI) Stats driver");
> +MODULE_LICENSE("GPL v2");
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux