Re: [PATCH] usb: dwc3: gadget: Skip resizing EP's TX FIFO if already resized

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Jack Pham wrote:
> On Fri, Oct 15, 2021 at 10:20:48PM +0000, Thinh Nguyen wrote:
>> Jack Pham wrote:
>>> On Fri, Oct 08, 2021 at 12:07:20AM +0000, Thinh Nguyen wrote:
>>>> Wesley Cheng wrote:
>>>>>
>>>>>
>>>>> On 9/10/2021 8:08 PM, Thinh Nguyen wrote:
>>>>>> Wesley Cheng wrote:
>>>>>>>
>>>>>>>
>>>>>>> On 9/9/2021 6:15 PM, Thinh Nguyen wrote:
>>>>>>>> Jack Pham wrote:
>>>>>>>>> Some functions may dynamically enable and disable their endpoints
>>>>>>>>> regularly throughout their operation, particularly when Set Interface
>>>>>>>>> is employed to switch between Alternate Settings.  For instance the
>>>>>>>>> UAC2 function has its respective endpoints for playback & capture
>>>>>>>>> associated with AltSetting 1, in which case those endpoints would not
>>>>>>>>> get enabled until the host activates the AltSetting.  And they
>>>>>>>>> conversely become disabled when the interfaces' AltSetting 0 is
>>>>>>>>> chosen.
>>>>>>>>>
>>>>>>>>> With the DWC3 FIFO resizing algorithm recently added, every
>>>>>>>>> usb_ep_enable() call results in a call to resize that EP's TXFIFO,
>>>>>>>>> but if the same endpoint is enabled again and again, this incorrectly
>>>>>>>>> leads to FIFO RAM allocation exhaustion as the mechanism did not
>>>>>>>>> account for the possibility that endpoints can be re-enabled many
>>>>>>>>> times.
>>>>>>>>>
>>>>>>>>> Example log splat:
>>>>>>>>>
>>>>>>>>> 	dwc3 a600000.dwc3: Fifosize(3717) > RAM size(3462) ep3in depth:217973127
>>>>>>>>> 	configfs-gadget gadget: u_audio_start_capture:521 Error!
>>>>>>>>> 	dwc3 a600000.dwc3: request 000000000be13e18 was not queued to ep3in
>>>>>>>>>
>>>>>>>>> This is easily fixed by bailing out of dwc3_gadget_resize_tx_fifos()
>>>>>>>>> if an endpoint is already resized, avoiding the calculation error
>>>>>>>>> resulting from accumulating the EP's FIFO depth repeatedly.
>>>>>>>>>
>>>>>>>>> Fixes: 9f607a309fbe9 ("usb: dwc3: Resize TX FIFOs to meet EP bursting requirements")
>>>>>>>>> Signed-off-by: Jack Pham <jackp@xxxxxxxxxxxxxx>
>>>>>>>>> ---
>>>>>>>>>  drivers/usb/dwc3/gadget.c | 4 ++++
>>>>>>>>>  1 file changed, 4 insertions(+)
>>>>>>>>>
>>>>>>>>> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
>>>>>>>>> index 804b50548163..c647c76d7361 100644
>>>>>>>>> --- a/drivers/usb/dwc3/gadget.c
>>>>>>>>> +++ b/drivers/usb/dwc3/gadget.c
>>>>>>>>> @@ -747,6 +747,10 @@ static int dwc3_gadget_resize_tx_fifos(struct dwc3_ep *dep)
>>>>>>>>>  	if (!usb_endpoint_dir_in(dep->endpoint.desc) || dep->number <= 1)
>>>>>>>>>  		return 0;
>>>>>>>>>  
>>>>>>>>> +	/* bail if already resized */
>>>>>>>>> +	if (dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(dep->number >> 1)))
>>>>>>>>> +		return 0;
>>>>>>>>> +
>>>>>>>>>  	ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
>>>>>>>>>  
>>>>>>>>>  	if ((dep->endpoint.maxburst > 1 &&
>>>>>>>>>
>>>>>>>
>>>>>>> Hi Thinh,
>>>>>>>
>>>>>>>>
>>>>>>>> This seems like a workaround more than a fix. As previously pointed out,
>>>>>>>> there will be problems when there are multiple alternate setting
>>>>>>>> interface [2]. If we're doing this way, are we properly allocating the
>>>>>>>> fifo size for the alternate setting that requires the most fifo size and
>>>>>>>> not just the first alt-setting 0? Also different alt-setting can have
>>>>>>>
>>>>>>> Each alt interface will call usb_ep_autoconfig() which should be
>>>>>>> assigned different endpoint numbers.  This would mean that if alt intf#0
>>>>>>> gets selected, and EP is enabled, then we will resize the TXFIFO and map
>>>>>>> that FIFO to the physical EP.  Then when/if the host requests the other
>>>>>>> alt intf#1, and that calls EP enable, then the logic will then attempt
>>>>>>> to resize based on the parameters, and again map that FIFO to the
>>>>>>> physical EP. (since we call autoconfig on all interfaces, they should be
>>>>>>> assigned different endpoints)
>>>>>
>>>>> Hi Thinh,
>>>>>
>>>>>>
>>>>>> That's not true. Different alt-settings of an interface can share
>>>>>> endpoint numbers. This is often the case for UASP driver where
>>>>>> alt-setting 0 is for BOT protocol and alt-setting 1 is UASP. When we
>>>>>> switch alt-setting, we disable the current endpoints and enable the
>>>>>> old/new ones.
>>>>>>
>>>>>
>>>>> Thanks for pointing that use case out.  Maybe we can consider seeing if
>>>>> we can walk through all alternate interfaces for a particular function,
>>>>> and resize for the largest setting?  That might be a possible
>>>>> improvement made to the check_config() function.  Let me start makign
>>>>> the changes for this and verifying it.
>>>>>
>>>>
>>>> Thanks!
>>>>
>>>> Currently the gadget configures early and informs the gadget driver of
>>>> how many endpoints are available, which doesn't leave much room for the
>>>> gadget to do optimization/reconfiguration.
>>>>
>>>> If there's an option for the composite layer to inform the controller
>>>> driver of the entire configuration, then we can take advantage of more
>>>> dwc3 controller capability/flexibility (not just resizing txfifo).
>>>>
>>>>>>>
>>>>>>> I agree that there is currently a limitation because we are going to
>>>>>>> reserve at minimum 1 FIFO for BOTH alt interfaces, even though there is
>>>>>>> only 1 interface active at a time.  The missing logic that we might be
>>>>>>> missing is seeing how we can re-purpose the FIFO that is being disabled.
>>>>>>>  However, I think Jack's fix here would be applicable to the improvement
>>>>>>> in logic to re-use/re-assign FIFO space allocated by disabled EPs also.
>>>>>>>
>>>>>>
>>>>>> Improvement is always great. I just hope we don't just stop where we are
>>>>>> now. Since you're working on this feature at the moment, it would be
>>>>>> good to also resolve some of the outstanding issues as Jack's fix seems
>>>>>> to be incomplete.
>>>>>>
>>>>>
>>>>> If we implement the improvement mentioned above, I think Jack's fix will
>>>>> be applicable there as well.  If we resize for the largest alternate
>>>>> interface, then there would be no reason for us to resize again.
>>>>>
>>>> As long as you have the above as part of your roadmap, I don't mind
>>>> Jack's fix for now.
>>>
>>> Thanks for your input as always Thinh.  Does the patch still look ok in
>>> its current state?  Last time I had responded to Felipe that I would try
>>
>> TX endpoints should have non-zero GTXFIFOSIZ. Using the register as a
>> flag to check whether it's been resized is not ok. Also, what happened
>> after resizing the txfifo? Do you restore its previous default value?
> 
> The choice to use the resizing algorithm is a fixed setting determined
> by device property.  So if it is enabled for a particular platform
> instance, it means we don't intend to use any of the default values.
> All the registers will get cleared to 0 upon every Set Configuration so
> that each EP enable call thereafter will be starting from a clean slate.

Some fields of GTXFIFOSIZ may not get cleared. Depends on the controller
version, we introduce different fields (as the case for DWC32 and
DWC31). So this may not apply for all the time. I just noticed that the
entire GTXFIFOSIZ was written with 0. Please only write to the specific
fields with proper macros.

> 
> As you correctly pointed out however, this doesn't quite work well for
> AltSettings where EPs may come and go well after the Set Config.  This
> will be where future improvements will hopefully address.
> 
>>> to entertain adding an explicit flag to keep track of whether an EP had
>>> been resized yet or not.  When trying to implement this as another
>>> DWC3_EP_* bit for dep->flags we'd then need to retain this flag across
>>> ep_disable/enable calls, so it looks a tiny bit cumbersome because
>>> dep->flags isn't neatly 0 anymore :-P.
>>>
>>> So ep_disable() would need to look something like this:
>>>
>>>  static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
>>>  {
>>>  ...
>>> 	dep->stream_capable = false;
>>> 	dep->type = 0;
>>> -	dep->flags = 0;
>>> +	dep->flags &= DWC3_EP_TXFIFO_RESIZED;
>>
>> I think you mean this?
>> dep->flags &= ~DWC3_EP_TXFIFO_RESIZED;
> 
> No I do mean AND without any inverting, since if that flag was set we
> need to keep it still set after disabling.
> 
>>> 	return 0;
>>>  }
>>>
>>> The flag would be initially set in dwc3_gadget_resize_tx_fifos() and
>>> also would need to be checked there as well to avoid re-resizing.  It
>>> would then get cleared in dwc3_gadget_clear_tx_fifos().
>>>
>>> Is this still preferable to the current patch with just the single
>>> register read?
>>>
>>
>> What if we change the configuration from the configfs? Would the flag
>> persist? If that's the case, that doesn't look right.
> 
> Yes, it might still be set, but this is only a transient state.  It will
> eventually get cleared at the time the GTXFIFOSIZ is reset back to 0
> during dwc3_gadget_clear_tx_fifos() when the next Set Config (in
> dwc3_ep0_set_config()) is received during enumeration in the new
> configuration.
> 
> I can go ahead with V2 of this patch using this flag to be more clear.
> 

I think using a flag is clearer also.

Thanks,
Thinh




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux