This looks specific to SDM845, so the subject line should mention
SDM845, e.g.,
PCI: qcom: Fix SDM845 incorrect register offset
On Fri, Oct 15, 2021 at 12:28:49AM +0530, Prasad Malisetty wrote:
> In pcie_init_2_7_0 one of the register writes using incorrect offset
> as per the platform register definitions (PCIE_PARF_AXI_MSTR_WR_ADDR_HALT
> offset value should be 0x1A8 instead 0x178).
> Update the correct offset value for SDM845 platform.
Add "()" after function name. Add blank line between paragraphs.
It'd be nice to have a clue about what fails because of the incorrect
register offset. ed8cc3b1fc84 is almost two years old, so I guess
it's not an obvious issue.
> fixes: ed8cc3b1 ("PCI: qcom: Add support for SDM845 PCIe controller")
Capitalize "Fixes:", use 12-char SHA1, remove blank line after. Look
at previous git history and copy the style there.
>
> Signed-off-by: Prasad Malisetty <pmaliset@xxxxxxxxxxxxxx>
It looks like ed8cc3b1fc84 appeared in v5.6, so this should probably
have a "Cc: stable@xxxxxxxxxxxxxxx" tag as well.
> ---
> drivers/pci/controller/dwc/pcie-qcom.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 8a7a300..5bce152 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1230,9 +1230,9 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
> writel(val, pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL);
>
> if (IS_ENABLED(CONFIG_PCI_MSI)) {
> - val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
> + val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2);
> val |= BIT(31);
> - writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
> + writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2);
> }
>
> return 0;
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
