Re: [PATCH v2 06/11] drm/msm/disp/dpu1: Don't use DSC with mode_3d

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/10/2021 10:08, Vinod Koul wrote:
We cannot enable mode_3d when we are using the DSC. So pass
configuration to detect DSC is enabled and not enable mode_3d
when we are using DSC

We add a helper dpu_encoder_helper_get_dsc_mode() to detect dsc
enabled and pass this to .setup_intf_cfg()

Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
Changes since
v1:
  - Move this patch from 7 to 6
  - Update the changelog
  - Make dsc as int and store the DSC indices

  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h     | 11 +++++++++++
  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c |  2 ++
  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c           |  5 +++--
  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h           |  2 ++
  4 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
index e7270eb6b84b..fca07ed03317 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
@@ -332,6 +332,17 @@ static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode(
  	return BLEND_3D_NONE;
  }
+static inline bool dpu_encoder_helper_get_dsc_mode(struct dpu_encoder_phys *phys_enc)
+{
+	struct drm_encoder *drm_enc = phys_enc->parent;
+	struct msm_drm_private *priv = drm_enc->dev->dev_private;
+
+	if (priv->dsc)
+		return BIT(0) | BIT(1); /* Hardcoding for 2 DSC topology */

Please use defined values here rater than just BIT().

+
+	return 0;
+}
+
  /**
   * dpu_encoder_helper_split_config - split display configuration helper function
   *	This helper function may be used by physical encoders to configure
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
index aa01698d6b25..8e5c0911734c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
@@ -70,6 +70,8 @@ static void _dpu_encoder_phys_cmd_update_intf_cfg(
  	intf_cfg.intf_mode_sel = DPU_CTL_MODE_SEL_CMD;
  	intf_cfg.stream_sel = cmd_enc->stream_sel;
  	intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
+	intf_cfg.dsc = dpu_encoder_helper_get_dsc_mode(phys_enc);
+
  	ctl->ops.setup_intf_cfg(ctl, &intf_cfg);
  }
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
index 64740ddb983e..3c79bd9c2fe5 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
@@ -118,7 +118,7 @@ static u32 dpu_hw_ctl_get_pending_flush(struct dpu_hw_ctl *ctx)
  	return ctx->pending_flush_mask;
  }
-static inline void dpu_hw_ctl_trigger_flush_v1(struct dpu_hw_ctl *ctx)
+static void dpu_hw_ctl_trigger_flush_v1(struct dpu_hw_ctl *ctx)
  {
if (ctx->pending_flush_mask & BIT(MERGE_3D_IDX))
@@ -519,7 +519,8 @@ static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
intf_cfg |= (cfg->intf & 0xF) << 4; - if (cfg->mode_3d) {
+	/* In DSC we can't set merge, so check for dsc too */
+	if (cfg->mode_3d && !cfg->dsc) {

The more I think about this hunk, the more I'm unsure about it.
Downstream has the following topoligies defined:
* @SDE_RM_TOPOLOGY_DUALPIPE_3DMERGE_DSC: 2 LM, 2 PP, 3DMux, 1 DSC, 1 INTF/WB
 * @SDE_RM_TOPOLOGY_QUADPIPE_3DMERGE_DSC  4 LM, 4 PP, 3DMux, 3 DSC, 2 INTF

While the latter is not supported on sdm845, the former one should be (by the hardware). So in the driver I think we should make sure that mode_3d does not get set rather than disallowing it here.

  		intf_cfg |= BIT(19);
  		intf_cfg |= (cfg->mode_3d - 0x1) << 20;
  	}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
index 806c171e5df2..5dfac5994bd4 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
@@ -39,6 +39,7 @@ struct dpu_hw_stage_cfg {
   * @mode_3d:               3d mux configuration
   * @merge_3d:              3d merge block used
   * @intf_mode_sel:         Interface mode, cmd / vid
+ * @dsc:                   DSC BIT masks
   * @stream_sel:            Stream selection for multi-stream interfaces
   */
  struct dpu_hw_intf_cfg {
@@ -46,6 +47,7 @@ struct dpu_hw_intf_cfg {
  	enum dpu_3d_blend_mode mode_3d;
  	enum dpu_merge_3d merge_3d;
  	enum dpu_ctl_mode_sel intf_mode_sel;
+	unsigned int dsc;
  	int stream_sel;
  };


--
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux