Re: [PATCH v11 1/5] dt-bindings: Introduce QCOM Sleep stats bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Stephan,

On 10/8/2021 1:20 AM, Stephan Gerhold wrote:
On Thu, Oct 07, 2021 at 03:27:25PM +0530, Maulik Shah wrote:
From: Mahesh Sivasubramanian <msivasub@xxxxxxxxxxxxxx>

Add device binding documentation for Qualcomm Technologies, Inc. (QTI)
Sleep stats driver. The driver is used for displaying Sleep statistic maintained
by Always On Processor or Resource Power Manager.

Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Mahesh Sivasubramanian <msivasub@xxxxxxxxxxxxxx>
Signed-off-by: Lina Iyer <ilina@xxxxxxxxxxxxxx>
Signed-off-by: Maulik Shah <mkshah@xxxxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
  .../bindings/soc/qcom/qcom-sleep-stats.yaml        | 47 ++++++++++++++++++++++
  1 file changed, 47 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom-sleep-stats.yaml

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom-sleep-stats.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom-sleep-stats.yaml
new file mode 100644
index 0000000..5213daf
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom-sleep-stats.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom-sleep-stats.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. (QTI) Sleep stats bindings
+
+maintainers:
+  - Maulik Shah <mkshah@xxxxxxxxxxxxxx>
+
+description:
+  Always On Processor/Resource Power Manager maintains statistics of the SoC
+  sleep modes involving powering down of the rails and oscillator clock.
+
+  Statistics includes SoC sleep mode type, number of times low power mode were
+  entered, time of last entry, time of last exit and accumulated sleep duration.
+
+properties:
+  compatible:
+    enum:
+      - qcom,rpmh-sleep-stats
+      - qcom,rpm-sleep-stats
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Example of rpmh sleep stats
+  - |
+    sram@c3f0000 {
+      compatible = "qcom,rpmh-sleep-stats";
+      reg = <0x0c3f0000 0x400>;
+    };
+  # Example of rpm sleep stats
+  - |
+    sram@4690000 {
+      compatible = "qcom,rpm-sleep-stats";
+      reg = <0x04690000 0x400>;
+    };

Does this region really only contain "rpm-*sleep*-stats"? AFAICT this is
really a more generic memory region where various offsets are read from.

Right the area contains all kind of sleep stats/logs.


These are all the offsets in msm8998-pm.dtsi downstream [1]:
   ...9000c: rpm-rail-stats offset
   ...90014: rpm-sleep-stats offset (RPM_DYNAMIC_ADDR in your driver)
   ...90018: rpm-log offset
   ...9001c: "RPM FREE HEAP SPACE"

How would you set up any of the other drivers if the entire region
is declared as "rpm-sleep-stats"?

We don't need to setup other drivers.
The idea is to have single stats driver (qcom_sleep_stats) that can be enahanced to to read other stats also on both RPM/ PRMH targets.

Today this driver reads only sleep stats from offset 0x90014.
if in future say, we want to read rpm-rail-stats from offset 0x9000c then it can be added in the existing driver.

In the rpm data, add one more entry to indicate reading rpm-rail-stats,
something like below and add new compatible flag for the target, may be
"qcom,rpm-sleep-stats-legacy" and should work like,

#define RPM_RAIL_STATS_ADDR 0xc

static const struct stats_config rpm_data = {
        .stats_offset = 0,
        .num_records = 2,
        .appended_stats_avail = true,
        .dynamic_offset = true,
        .rpm_rail_stats = true,
};

and check in driver probe like

        if (config->rpm_rail_stats) {
	//create rpm rail stats related files.
        }

Similarly for other rpm-logs / any other stats can be added in same driver.

Hope this clarifies.


Perhaps this region should have a more generic name that represents what
it actually is and not only one of the information it contains, similar
to "qcom,rpm-msg-ram"?

sram looks good to me. Actually on RPM targets its RPM data ram and RPMH targets its msgram. To keep the name common sram is used here.

Thanks,
Maulik


Thanks,
Stephan

[1]: https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/arch/arm/boot/dts/qcom/msm8998-pm.dtsi?h=LA.UM.8.4.1.c25#n271


--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux