On Tue 05 Oct 16:04 PDT 2021, khsieh@xxxxxxxxxxxxxx wrote: > On 2021-10-05 15:36, Stephen Boyd wrote: > > Quoting Bjorn Andersson (2021-10-05 14:40:38) > > > On Tue 05 Oct 11:45 PDT 2021, Stephen Boyd wrote: > > > > > > > Quoting Bjorn Andersson (2021-10-04 19:37:50) > > > > > Found in the middle of a patch from Sankeerth was the reduction of the > > > > > INIT_SETUP timeout from 10s to 100ms. Upon INIT_SETUP timeout the host > > > > > is initalized and HPD interrupt start to be serviced, so in the case of > > > > > eDP this reduction improves the user experience dramatically - i.e. > > > > > removes 9.9s of bland screen time at boot. > > > > > > > > > > Suggested-by: Sankeerth Billakanti <sbillaka@xxxxxxxxxxxxxx> > > > > > Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> > > > > > --- > > > > > > > > Any Fixes tag? BTW, the delay design is pretty convoluted. I had to go > > > > re-read the code a couple times to understand that it's waiting 100ms > > > > times the 'delay' number. Whaaaaat? > > > > > > > > > > I assume you're happy with the current 10s delay on the current > > > devices, so I don't think we should push for this to be backported. > > > I have no need for it to be backported on my side at least. > > > > > > > Sure. Fixes tag != backported to stable trees but it is close. > > > > > > Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx> > > > > dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 1); <== to 100ms > > This patch will prevent usb3 from working due to dp driver initialize phy > earlier than usb3 which cause timeout error at power up usb3 phy when both > edp and dp are enabled. Can you please help me understand what you mean here, I use this on my sc8180x with both eDP and USB-C/DP right now. What is it that doesn't work? Or am I just lucky in some race condition? Thanks, Bjorn > I had prepared a patch (drm/msm/dp: do not initialize combo phy until plugin > interrupt) to fix this problem. > Unfortunately, my patch is depend on Bjorn's patch (PATCH v3 3/5] > drm/msm/dp: Support up to 3 DP controllers). > I will submit my patch for review once Bjorn's patches merged in. > Therefore I would think this patch should go after both Bjorn's patches and > my patch. > > >