Re: [PATCH v2 0/3] Add missing vdd-supply for QUSB2 PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04-10-21, 11:01, Shawn Guo wrote:
> Hi Vinod,
> 
> On Fri, Oct 01, 2021 at 01:46:23PM +0530, Vinod Koul wrote:
> > Hi Shawn,
> > 
> > On 28-09-21, 10:19, Shawn Guo wrote:
> > > The series adds missing vdd-supply for QUSB2 PHY which is required for
> > > digital circuit.  The driver works right now likely because firmware
> > > already sets it up.  Add it to bindings, driver and DTS that miss the
> > > supply.
> > > 
> > > It should not cause problem for existing DTBs:
> > > - SC7180, SDM630, SDM845 based platforms already specified vdd-supply
> > >   in the DTBs.
> > > - MSM8996 and MSM8998 platform DTBs miss vdd-supply, but dummy regulator
> > >   will ensure QUSB2 PHY driver works as before on these platforms.
> > 
> > What about the rest.. I checked SM8350 and SM8250 mtp ones are missing
> > this. With the property made mandatory, I guess it would cause these to
> > fail right..
> 
> >From what I can see, SM8350 and SM8250 use qcom-snps-femto-v2 PHY
> rather than qcom-qusb2.  So they should not be affected by this series.

Right, somehow I seem to have overlooked that part :(

I am applying this now, thanks

-- 
~Vinod



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux