Stop specifying individual interrupts properties. Use #interrupt-cells
instead as we are switching qcom,spmi-mpp and qcom,ssbi-mpp to
hierarchical IRQ setup.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
.../devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
index 96cb78ab6437..ba16d8553c0b 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
@@ -40,12 +40,10 @@ properties:
reg:
maxItems: 1
- interrupts:
- minItems: 1
- maxItems: 12
- description:
- Must contain an array of encoded interrupt specifiers for
- each available MPP
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
gpio-controller: true
@@ -161,7 +159,8 @@ examples:
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pm8841_mpp 0 0 4>;
- interrupts = <4 0xa0 0 0>, <4 0xa1 0 0>, <4 0xa2 0 0>, <4 0xa3 0 0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pm8841_default>;
--
2.30.2
