[PATCH] drm/msm/dsi: use bulk clk API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use clk_bulk_* API instead of hand-coding them. Note, this drops support
for legacy clk naming (e.g. "iface_clk" instead of just "iface"),
however all in-kernel device trees were converted long long ago. The
warning is present there since 2017.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 59 ++++++------------------------
 1 file changed, 12 insertions(+), 47 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index e269df285136..3b81f40bba2e 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -106,7 +106,8 @@ struct msm_dsi_host {
 	phys_addr_t ctrl_size;
 	struct regulator_bulk_data supplies[DSI_DEV_REGULATOR_MAX];
 
-	struct clk *bus_clks[DSI_BUS_CLK_MAX];
+	int num_bus_clks;
+	struct clk_bulk_data bus_clks[DSI_BUS_CLK_MAX];
 
 	struct clk *byte_clk;
 	struct clk *esc_clk;
@@ -374,15 +375,14 @@ static int dsi_clk_init(struct msm_dsi_host *msm_host)
 	int i, ret = 0;
 
 	/* get bus clocks */
-	for (i = 0; i < cfg->num_bus_clks; i++) {
-		msm_host->bus_clks[i] = msm_clk_get(pdev,
-						cfg->bus_clk_names[i]);
-		if (IS_ERR(msm_host->bus_clks[i])) {
-			ret = PTR_ERR(msm_host->bus_clks[i]);
-			pr_err("%s: Unable to get %s clock, ret = %d\n",
-				__func__, cfg->bus_clk_names[i], ret);
-			goto exit;
-		}
+	for (i = 0; i < cfg->num_bus_clks; i++)
+		msm_host->bus_clks[i].id = cfg->bus_clk_names[i];
+	msm_host->num_bus_clks = cfg->num_bus_clks;
+
+	ret = devm_clk_bulk_get(&pdev->dev, msm_host->num_bus_clks, msm_host->bus_clks);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Unable to get clocks, ret = %d\n", ret);
+		goto exit;
 	}
 
 	/* get link and source clocks */
@@ -433,41 +433,6 @@ static int dsi_clk_init(struct msm_dsi_host *msm_host)
 	return ret;
 }
 
-static int dsi_bus_clk_enable(struct msm_dsi_host *msm_host)
-{
-	const struct msm_dsi_config *cfg = msm_host->cfg_hnd->cfg;
-	int i, ret;
-
-	DBG("id=%d", msm_host->id);
-
-	for (i = 0; i < cfg->num_bus_clks; i++) {
-		ret = clk_prepare_enable(msm_host->bus_clks[i]);
-		if (ret) {
-			pr_err("%s: failed to enable bus clock %d ret %d\n",
-				__func__, i, ret);
-			goto err;
-		}
-	}
-
-	return 0;
-err:
-	for (; i > 0; i--)
-		clk_disable_unprepare(msm_host->bus_clks[i]);
-
-	return ret;
-}
-
-static void dsi_bus_clk_disable(struct msm_dsi_host *msm_host)
-{
-	const struct msm_dsi_config *cfg = msm_host->cfg_hnd->cfg;
-	int i;
-
-	DBG("");
-
-	for (i = cfg->num_bus_clks - 1; i >= 0; i--)
-		clk_disable_unprepare(msm_host->bus_clks[i]);
-}
-
 int msm_dsi_runtime_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -478,7 +443,7 @@ int msm_dsi_runtime_suspend(struct device *dev)
 	if (!msm_host->cfg_hnd)
 		return 0;
 
-	dsi_bus_clk_disable(msm_host);
+	clk_bulk_disable_unprepare(msm_host->num_bus_clks, msm_host->bus_clks);
 
 	return 0;
 }
@@ -493,7 +458,7 @@ int msm_dsi_runtime_resume(struct device *dev)
 	if (!msm_host->cfg_hnd)
 		return 0;
 
-	return dsi_bus_clk_enable(msm_host);
+	return clk_bulk_prepare_enable(msm_host->num_bus_clks, msm_host->bus_clks);
 }
 
 int dsi_link_clk_set_rate_6g(struct msm_dsi_host *msm_host)
-- 
2.33.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux