Re: [PATCH] drm/msm/dsi: dsi_phy_14nm: Take ready-bit into account in poll_for_ready

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06/09/2021 23:25, Marijn Suijten wrote:
The downstream driver models this PLL lock check as an if-elseif-else.
The only way to reach the else case where pll_locked=true [1] is by
succeeding both readl_poll_timeout_atomic calls (which return zero on
success) in the if _and_ elseif condition.  Hence both the "lock" and
"ready" bit need to be tested in the SM_READY_STATUS register before
considering the PLL locked and ready to go.

Tested on the Sony Xperia XA2 Ultra (nile-discovery, sdm630).

[1]: https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/clk/qcom/mdss/mdss-dsi-pll-14nm-util.c?h=LA.UM.9.2.1.r1-08000-sdm660.0#n302

Fixes: f079f6d999cb ("drm/msm/dsi: Add PHY/PLL for 8x96")
Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

---
  drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 30 +++++++++++-----------
  1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
index 8905f365c932..789b08c24d25 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
@@ -110,14 +110,13 @@ static struct dsi_pll_14nm *pll_14nm_list[DSI_MAX];
  static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm,
  				    u32 nb_tries, u32 timeout_us)
  {
-	bool pll_locked = false;
+	bool pll_locked = false, pll_ready = false;
  	void __iomem *base = pll_14nm->phy->pll_base;
  	u32 tries, val;
tries = nb_tries;
  	while (tries--) {
-		val = dsi_phy_read(base +
-			       REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS);
+		val = dsi_phy_read(base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS);
  		pll_locked = !!(val & BIT(5));
if (pll_locked)
@@ -126,23 +125,24 @@ static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm,
  		udelay(timeout_us);
  	}
- if (!pll_locked) {
-		tries = nb_tries;
-		while (tries--) {
-			val = dsi_phy_read(base +
-				REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS);
-			pll_locked = !!(val & BIT(0));
+	if (!pll_locked)
+		goto out;
- if (pll_locked)
-				break;
+	tries = nb_tries;
+	while (tries--) {
+		val = dsi_phy_read(base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS);
+		pll_ready = !!(val & BIT(0));
- udelay(timeout_us);
-		}
+		if (pll_ready)
+			break;
+
+		udelay(timeout_us);
  	}
- DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* ");
+out:
+	DBG("DSI PLL is %slocked, %sready", pll_locked ? "" : "*not* ", pll_ready ? "" : "*not* ");
- return pll_locked;
+	return pll_locked && pll_ready;
  }
static void dsi_pll_14nm_config_init(struct dsi_pll_config *pconf)



--
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux