Add node to support the QUP5 I2C controller inside of IPQ8074.
It is exactly the same as QUP2 controllers.
Some routers like ZTE MF269 use this bus.
Signed-off-by: Chukun Pan <amadeus@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index aebd0949ac81..68aaad4c9705 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -430,6 +430,21 @@
status = "disabled";
};
+ blsp1_i2c5: i2c@78b9000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x78b9000 0x600>;
+ interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ clock-frequency = <400000>;
+ dmas = <&blsp_dma 21>, <&blsp_dma 20>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
blsp1_i2c6: i2c@78ba000 {
compatible = "qcom,i2c-qup-v2.2.1";
#address-cells = <1>;
--
2.17.1
