Re: [Freedreno] [PATCH v2 00/22] drm/msm/dpu: switch dpu_plane to be virtual

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, 30 Sept 2021 at 05:19, <abhinavk@xxxxxxxxxxxxxx> wrote:
>
> Hi Dmitry
>
> On 2021-07-04 18:20, Dmitry Baryshkov wrote:
> > As discussed on IRC, change dpu_plane implementation to be virtual:
> > register unified planes and select backing SSPP block at runtime.
> >
> > Use msm.dpu_use_virtual_planes=1 to enable usage of virtual planes
> > rather than statically allocated SSPPs at the plane registration.
> >
> > Patches 1-9 move state variables from struct dpu_plane onto the stack
> > allocation. State should not be a part of struct dpu_plane anyway.
> >
> > Patches 10-18 make additional changes to plane code, reworking check,
> > debugfs, dropping old multirec support, which results in patch 19
> > adding
> > support for virtual planes per se.
> >
> > Patches 20-22 demonstrate my main goal behind reworking dpu_plane
> > support. They change dpu_plane to automatically use one of SSPP block
> > features - multirec, an ability to display two unscaled RGB rectangles
> > using single SSPP block. This allows us to double the amount of created
> > planes. If the user tries to enable more planes than actually supported
> > by the underlying SSPP blocks, atomic_check code would return an error.
> >
> > As you can see, this patchset is not atomic, so different patches can
> > go
> > separately.
>
> I am half way through this series and have finished checking patches
> 1-12
> I am okay with patches 1-4, 6-12. Its a reasonable cleanup to make the
> dpu_plane struct lighter.
> I need a little more time with the rest as I am comparing the downstream
> solution against yours.
>
> As you mentioned, this patchset is not atomic, hence can you break it up
> like
> -> cleanup of dpu_plane struct in one series
> -> removal of current multirect and current src split which will include
> patch 5 as well
>
> So that the first series can go through and it gives us a little more
> time to check the second
> series.

Ok, I'll split the series according to your review.

>
> Thanks
>
> Abhinav
>
> >
> > Changes since v1:
> >  - Add multirec implementation
> >  - Added msm.dpu_use_virtual_planes kernel parameter instead of using
> >    compile time switch
> >  - Changed code to always reallocate SSPPs in the CRTC atomic check to
> >    let the kernel pick up the best multirec config. This can be
> >    optimized later.
> >  - Rework RM SSPP API to always receive plane id
> >  - Removed scaler_cfg, pixel_ext and cdp_cfg from struct
> > dpu_plane_state
> >  - Made _dpu_scaler_setup() call sspp's setup_scaler and setup_pe
> >  - Removed dpu_csc_cfg from dpu_plane
> >
> > The following changes since commit
> > e88bbc91849b2bf57683119c339e52916d34433f:
> >
> >   Revert "drm/msm/mdp5: provide dynamic bandwidth management"
> > (2021-06-23 14:06:20 -0700)
> >
> > are available in the Git repository at:
> >
> >   https://git.linaro.org/people/dmitry.baryshkov/kernel.git
> > dpu-multirec-2
> >
> > for you to fetch changes up to
> > 19f6afd40097d4c826e56b8f4a8cbd807f7b61f6:
> >
> >   drm/msm/dpu: add multirect support (2021-07-05 04:04:50 +0300)
> >
> > ----------------------------------------------------------------
> > Dmitry Baryshkov (22):
> >       drm/msm/dpu: move LUT levels out of QOS config
> >       drm/msm/dpu: remove pipe_qos_cfg from struct dpu_plane
> >       drm/msm/dpu: drop pipe_name from struct dpu_plane
> >       drm/msm/dpu: remove stage_cfg from struct dpu_crtc
> >       drm/msm/dpu: rip out master planes support
> >       drm/msm/dpu: move dpu_hw_pipe_cfg out of struct dpu_plane
> >       drm/msm/dpu: drop scaler config from plane state
> >       drm/msm/dpu: drop dpu_csc_cfg from dpu_plane
> >       drm/msm/dpu: remove dpu_hw_pipe_cdp_cfg from dpu_plane
> >       drm/msm/dpu: don't cache pipe->cap->features in dpu_plane
> >       drm/msm/dpu: don't cache pipe->cap->sblk in dpu_plane
> >       drm/msm/dpu: rip out debugfs support from dpu_plane
> >       drm/msm/dpu: drop src_split and multirect check from
> > dpu_crtc_atomic_check
> >       drm/msm/dpu: add list of supported formats to the DPU caps
> >       drm/msm/dpu: simplify DPU_SSPP features checks
> >       drm/msm/dpu: do not limit the zpos property
> >       drm/msm/dpu: add support for SSPP allocation to RM
> >       drm/msm/dpu: move pipe_hw to dpu_plane_state
> >       drm/msm/dpu: add support for virtualized planes
> >       drm/msm/dpu: fix smart dma support
> >       drm/msm/dpu: fix CDP setup to account for multirect index
> >       drm/msm/dpu: add multirect support
> >
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c       | 261 +++-----
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h       |   2 -
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c |  20 +-
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h |  20 +-
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c    |  41 +-
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h    |  52 +-
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c    |   2 +-
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h    |   2 +-
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c        | 234 ++++---
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h        |  70 +-
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c      | 851
> > +++++++++++--------------
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h      |  75 +--
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c         |  81 +++
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h         |   6 +
> >  14 files changed, 793 insertions(+), 924 deletions(-)
> >
> > _______________________________________________
> > Freedreno mailing list
> > Freedreno@xxxxxxxxxxxxxxxxxxxxx
> > https://lists.freedesktop.org/mailman/listinfo/freedreno



-- 
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux