Add a dts fragment file to support the sc7180 boards with the second
source edp bridge, Parade ps8640.
Signed-off-by: Philip Chen <philipchen@xxxxxxxxxxxx>
---
Changes in v2:
- Add the definition of edp_brij_i2c and some other properties to
ps8640 dts, making it match ti-sn65dsi86 dts better
.../qcom/sc7180-trogdor-parade-ps8640.dtsi | 108 ++++++++++++++++++
1 file changed, 108 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi
new file mode 100644
index 000000000000..c274ab41bd67
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor dts fragment for the boards with Parade ps8640 edp bridge
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/ {
+ pp3300_brij_ps8640: pp3300-brij-ps8640 {
+ compatible = "regulator-fixed";
+ status = "okay";
+ regulator-name = "pp3300_brij_ps8640";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&en_pp3300_edp_brij_ps8640>;
+
+ vin-supply = <&pp3300_a>;
+ };
+};
+
+&dsi0_out {
+ remote-endpoint = <&ps8640_in>;
+};
+
+edp_brij_i2c: &i2c2 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ps8640_bridge: edp-bridge@8 {
+ compatible = "parade,ps8640";
+ reg = <0x8>;
+
+ powerdown-gpios = <&tlmm 104 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&tlmm 11 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_brij_en>, <&edp_brij_ps8640_rst>;
+
+ vdd12-supply = <&pp1200_brij>;
+ vdd33-supply = <&pp3300_brij_ps8640>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ ps8640_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ ps8640_out: endpoint {
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+
+ aux_bus: aux-bus {
+ panel: panel {
+ /* Compatible will be filled in per-board */
+ power-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+
+ port {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&ps8640_out>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&tlmm {
+ edp_brij_ps8640_rst: edp-brij-ps8640-rst {
+ pinmux {
+ pins = "gpio11";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio11";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ en_pp3300_edp_brij_ps8640: en-pp3300-edp-brij-ps8640 {
+ pinmux {
+ pins = "gpio32";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio32";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+};
--
2.33.0.685.g46640cef36-goog
