[PATCH v9 0/4] Add DT bindings and DT nodes for PCIe and PHY in SC7280

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Changes added in v9:
    * Added fixed regulator entry for nvme.suggested by Stephen Boyd
    * Added NULL pointer check before accessing ops in pcie probe
      Suggested by Stephen Boyd

Changes added in v8:

    * Added seperate pinctrl state for NVMe LDO enable pin [v8 P3/4]
    * Removed pointer initialization for pcie_cfg [v8 P4/4]
    * Replaced bool pcie_pipe_clk_src with unsigned int:1 [v8 P4/4]
    * Changed gcc_pcie_1_pipe_clk_src to pipe_clk_src

Changes added in v7:

        * Removed two fallbacks qcom,pcie-sm8250 and snps,dw-pcie.
        * Replaced compatible method in get_resources_2_7_0 with
            flag approach suggested by Bjorn Helgaas .
        * Setting gcc_pcie_1_clk_src as XO in init_2_7_0 for
          gdsc enable.
        * Added specific NVMe GPIO entries for SKU1 and SKU2 support
          in idp.dts and idp2.dts respectively.
        * Moved pcie_1 and pcie_1_phy board specific entries into common
          board file sc7280-idp.dtsi file.

Changes in v6:

    * Removed platform check while setting gcc_pcie_1_pipe_clk_src
          as clk_set_parent will return 0 with nop if platform doesn't
          need to switch pipe clk source.
        * Moved wake-n gpio to board specific file sc7280-idp.dtsi
        * Sorted gpio.h header entry in sc7280.dtsi file

Changes in v5:

        * Re ordered PCIe, PHY nodes in Soc and board specific dtsi files.
        * Removed ref_clk entry in current patch [PATCH v4 P4/4].
        * I will add ref clk entry in suspend/ resume commits.
        * Added boolean flag in Soc specific dtsi file to differentiate
          SM8250 and SC7280 platforms. based on boolean flag, platforms will handle
          the pipe clk handling.

Changes in v4 as suggested by Bjorn:

        * Changed pipe clk mux name as gcc_pcie_1_pipe_clk_src.
        * Changed pipe_ext_src as phy_pipe_clk.
        * Updated commit message for [PATCH v4 4/4].

Changes in v3:
        * Changed pipe clock names in dt bindings as pipe_mux and phy_pipe.
        * Moved reset and NVMe GPIO pin configs into board specific file.
        * Updated pipe clk mux commit message.

Changes in v2:
        * Moved pcie pin control settings into IDP file.
        * Replaced pipe_clk_src with pipe_clk_mux in pcie driver
        * Included pipe clk mux setting change set in this series

Prasad Malisetty (4):
  dt-bindings: pci: qcom: Document PCIe bindings for SC7280
  arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes
  arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board
  PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280

 .../devicetree/bindings/pci/qcom,pcie.txt          |  17 +++
 arch/arm64/boot/dts/qcom/sc7280-idp.dts            |   9 ++
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi           |  54 ++++++++++
 arch/arm64/boot/dts/qcom/sc7280-idp2.dts           |   9 ++
 arch/arm64/boot/dts/qcom/sc7280.dtsi               | 119 +++++++++++++++++++++
 drivers/pci/controller/dwc/pcie-qcom.c             |  94 ++++++++++++++--
 6 files changed, 291 insertions(+), 11 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux