Re: [v7 3/3] arm64: dts: qcom: sc7280: Add EPSS L3 interconnect provider

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2021-09-16 01:10, Stephen Boyd wrote:
Quoting okukatla@xxxxxxxxxxxxxx (2021-09-14 23:26:19)
On 2021-09-15 10:35, okukatla@xxxxxxxxxxxxxx wrote:
> On 2021-09-04 00:36, Stephen Boyd wrote:
>> Quoting Odelu Kukatla (2021-08-20 04:23:41)
>>> Add Epoch Subsystem (EPSS) L3 interconnect provider node on SC7280
>>> SoCs.
>>>
>>> Signed-off-by: Odelu Kukatla <okukatla@xxxxxxxxxxxxxx>
>>> ---
>>>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 11 +++++++++++
>>>  1 file changed, 11 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi
>>> b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>>> index 53a21d0..cf59b47 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>>> @@ -1848,6 +1848,17 @@
>>>                         };
>>>                 };
>>>
>>> +               epss_l3: interconnect@18590000 {
>>> +                       compatible = "qcom,sc7280-epss-l3";
>>> +                       reg = <0 0x18590000 0 1000>,
>>
>> Is this supposed to be 0x1000?
>>
> No, This is 1000 or 0x3E8.

Wow ok. Why is it the only size that isn't in hex format? Please try to
be consistent and use hex throughout.

Sure, will update it to hex format in new revision.
We have mapped only required registers for L3 scaling, 1000/0x3E8 is
suffice.
But i will update it to 0x1000 in next revision so that entire clock
domain region-0 is mapped.

Doesn't that conflict with the cpufreq-hw device?

epss_l3 maps (0x18590000, size:0x1000) region which cpufreq-hw does not need. I will update size to 0x1000 for this region only.

>>> +                             <0 0x18591000 0 0x100>,
>>> +                             <0 0x18592000 0 0x100>,
>>> +                             <0 0x18593000 0 0x100>;
>>> +                       clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc
>>> GCC_GPLL0>;
>>> +                       clock-names = "xo", "alternate";
>>> +                       #interconnect-cells = <1>;
>>> +               };
>>> +
>>>                 cpufreq_hw: cpufreq@18591000 {
>>>                         compatible = "qcom,cpufreq-epss";
>>>                         reg = <0 0x18591100 0 0x900>,



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux