All DSI PHY/PLL drivers were referencing their VCO parent clock by a global name, most of which don't exist or have been renamed. These clock drivers seem to function fine without that except the 14nm driver for sdm6xx [1]. At the same time all DTs provide a "ref" clock as per the requirements of dsi-phy-common.yaml, but the clock is never used. This patchset puts that clock to use without relying on a global clock name, so that all dependencies are explicitly defined in DT (the firmware) in the end. [1]: https://lore.kernel.org/linux-arm-msm/386db1a6-a1cd-3c7d-a88e-dc83f8a1be96@xxxxxxxxxxxxxx/ Changes since v2: - Added Stephen's a-b and Angelo's r-bs; - Added .name fallback in msm8974's dsi_phy_28nm for a more graceful transition period; - Documented possible breakage in 1/2 if firmware isn't updated in parallel with the kernel. Changes since v1: - Dropped "arm: dts: qcom: apq8064: Use 27MHz PXO clock as DSI PLL reference" which has made its way into 5.15-fixes in advance of this patchset landing in 5.16; - Added Fixes: tags for commits that added missing "ref" clocks to DT while this firmware clock was never used (until this patchset); - Documented missing/wrong and later-added clocks (by aforementioned patches) in patch 1/2 more clearly. Marijn Suijten (2): drm/msm/dsi: Use "ref" fw clock instead of global name for VCO parent clk: qcom: gcc-sdm660: Remove transient global "xo" clock drivers/clk/qcom/gcc-sdm660.c | 14 -------------- drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 4 +++- drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 4 +++- drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 4 +++- drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 4 +++- drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 4 +++- 6 files changed, 15 insertions(+), 19 deletions(-) -- 2.33.0
