Re: [PATCH v6 02/13] dt-bindings: remoteproc: qcom: pas: Add QMP property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 06, 2021 at 01:53:46PM +0530, Sibi Sankar wrote:
> The load state power-domain, used by the co-processors to notify the
> Always on Subsystem (AOSS) that a particular co-processor is up/down,
> suffers from the side-effect of changing states during suspend/resume.
> However the co-processors enter low-power modes independent to that of
> the application processor and their states are expected to remain
> unaltered across system suspend/resume cycles. To achieve this behavior
> let's drop the load state power-domain and replace them with the qmp
> property for all SoCs supporting low power mode signalling.
> 
> Due to the current broken load state implementation, we can afford the
> binding breakage that ensues and the remoteproc functionality will remain
> the same when using newer kernels with older dtbs.
> 
> Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
> Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> ---
> 
> v6:
>  * Updated commit message to explain binding breakage. [Stephen]
> 
>  .../devicetree/bindings/remoteproc/qcom,adsp.yaml  | 61 +++++++++++-----------
>  1 file changed, 31 insertions(+), 30 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> index 0c112f3264a9..0d2b5bd4907a 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> @@ -93,6 +93,10 @@ properties:
>      maxItems: 1
>      description: Reference to the reserved-memory for the Hexagon core
>  
> +  qcom,qmp:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: Reference to the AOSS side-channel message RAM.
> +

[...]

> @@ -511,6 +486,32 @@ allOf:
>              - const: mss_restart
>              - const: pdc_reset
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,sc7180-mpss-pas
> +              - qcom,sc8180x-adsp-pas
> +              - qcom,sc8180x-cdsp-pas
> +              - qcom,sc8180x-mpss-pas
> +              - qcom,sm8150-adsp-pas
> +              - qcom,sm8150-cdsp-pas
> +              - qcom,sm8150-mpss-pas
> +              - qcom,sm8150-slpi-pas
> +              - qcom,sm8250-adsp-pas
> +              - qcom,sm8250-cdsp-pas
> +              - qcom,sm8250-slpi-pas
> +              - qcom,sm8350-adsp-pas
> +              - qcom,sm8350-cdsp-pas
> +              - qcom,sm8350-mpss-pas
> +              - qcom,sm8350-slpi-pas
> +    then:
> +      properties:
> +        qcom,qmp:
> +          items:
> +            - description: Reference to the AOSS side-channel message RAM.

This doesn't do anything. The property is already allowed for all 
compatibles. Perhaps you want to negate the if and put 'qcom,qmp: false' 
here.

Rob



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux