The power-domains exposed by AOSS QMP node are used to notify the Always on Subsystem (AOSS) that a particular co-processor is up/down. These co-processors enter low-power modes independent to that of the application processor and their states are expected to remain unaltered across system suspend/resume cycles. To achieve this behavior let's drop the load power-domain and replace them with generic qmp_send interface instead. Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx> Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx> Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> --- Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml index 1904612fad85..e2e173dfada7 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml @@ -19,8 +19,7 @@ description: The AOSS side channel exposes control over a set of resources, used to control a set of debug related clocks and to affect the low power state of resources - related to the secondary subsystems. These resources are exposed as a set of - power-domains. + related to the secondary subsystems. properties: compatible: @@ -58,13 +57,6 @@ properties: description: The single clock represents the QDSS clock. - "#power-domain-cells": - const: 1 - description: | - The provided power-domains are: - CDSP state (0), LPASS state (1), modem state (2), SLPI - state (3), SPSS state (4) and Venus state (5). - required: - compatible - reg @@ -102,7 +94,6 @@ examples: mboxes = <&apss_shared 0>; #clock-cells = <0>; - #power-domain-cells = <1>; cx_cdev: cx { #cooling-cells = <2>; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project