Re: [PATCH] ASoC: qcom: lpass-platform: Reset irq clear reg post handling interrupts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Srinivasa Rao Mandadapu (2021-09-03 03:01:53)
> Update interrupt clear register with reset value after addressing
> all interrupts. This is to fix playback or capture hanging issue in
> simultaneous playback and capture usecase.
>
> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@xxxxxxxxxxxxxx>
> ---

Any Fixes tag?

>  sound/soc/qcom/lpass-platform.c | 6 ++++++
>  1 file changed, 6 insertions(+)
>
> diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c
> index f9df76d37858..1a0a4b0b1a03 100644
> --- a/sound/soc/qcom/lpass-platform.c
> +++ b/sound/soc/qcom/lpass-platform.c
> @@ -749,6 +749,12 @@ static irqreturn_t lpass_platform_lpaif_irq(int irq, void *data)
>                 }
>         }
>
> +       rv = regmap_write(drvdata->lpaif_map, LPAIF_IRQCLEAR_REG(v, LPAIF_IRQ_PORT_HOST), 0x0);
> +       if (rv) {
> +               pr_err("error writing to irqstat reg: %d\n", rv);
> +               return IRQ_NONE;

I was thinking we should return IRQ_HANDLED still, but then I guess
failing to clear the irq be treated as a spurious irq so that if we fail
enough times we'll shut off the irq at the irqchip. Things are going bad
if the write fails.

> +       }
> +
>         return IRQ_HANDLED;
>  }
>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux