This series adds support for the Xiaomi MSM8996 platform, which includes 5 devices: - Mi 5 (gemini): MSM8996 + PMI8994 - Mi Note 2 (scorpio): MSM8996 Pro + PMI8996 - Mi 5s (capricorn): MSM8996 Pro + PMI8996 - Mi Mix (lithium): MSM8996 Pro + PMI8996 - Mi 5s Plus (natrium): MSM8996 Pro + PMI8996 These devices share a common board design with only a few differences. Out of these 5 devices, this series adds initial support for the Mi Note 2 and the Mi 5. Adding support for the remaining 3 would only require adding a DTS for each, while accounting for hardware differences such as different panels. Raffaele Tranquillini (1): arm64: dts: qcom: msm8996: xiaomi-gemini: Add support for Xiaomi Mi 5 Yassine Oudjana (3): arm64: dts: qcom: db820c: Move blsp1_uart2 pin states to msm8996.dtsi arm64: dts: qcom: msm8996: Add blsp2_i2c3 arm64: dts: qcom: Add support for the Xiaomi MSM8996 platform arch/arm64/boot/dts/qcom/Makefile | 2 + arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 29 - .../boot/dts/qcom/msm8996-xiaomi-common.dtsi | 673 ++++++++++++++++++ .../boot/dts/qcom/msm8996-xiaomi-gemini.dts | 431 +++++++++++ .../boot/dts/qcom/msm8996-xiaomi-scorpio.dts | 431 +++++++++++ arch/arm64/boot/dts/qcom/msm8996.dtsi | 49 ++ 6 files changed, 1586 insertions(+), 29 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts -- 2.33.0
