The MSM8998 MMCC is supported and has a driver: configure it as a preparation for a later enablement of multimedia nodes (mdp, venus and others). Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 31 +++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 34039b5c8017..1a53f15f1266 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8998.h> #include <dt-bindings/clock/qcom,gpucc-msm8998.h> +#include <dt-bindings/clock/qcom,mmcc-msm8998.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/gpio/gpio.h> @@ -2330,6 +2331,36 @@ blsp2_i2c6: i2c@c1ba000 { #size-cells = <0>; }; + mmcc: clock-controller@c8c0000 { + compatible = "qcom,mmcc-msm8998"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xc8c0000 0x40000>; + status = "disabled"; + + clock-names = "xo", + "gpll0", + "dsi0dsi", + "dsi0byte", + "dsi1dsi", + "dsi1byte", + "hdmipll", + "dplink", + "dpvco", + "core_bi_pll_test_se"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_MMSS_GPLL0_CLK>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + }; + remoteproc_adsp: remoteproc@17300000 { compatible = "qcom,msm8998-adsp-pas"; reg = <0x17300000 0x4040>; -- 2.32.0