There's nothing magical about GPIO91 and boards could use different GPIOs for card detect. Move the pin out of the dtsi file and to the only existing board file. Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 1 + arch/arm64/boot/dts/qcom/sc7280.dtsi | 4 ---- 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 371a2a9dcf7a..ed9f9283b71d 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -336,6 +336,7 @@ data { }; sd-cd { + pins = "gpio91"; bias-pull-up; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 53a21d086178..99e946a33fbb 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -1573,10 +1573,6 @@ cmd { data { pins = "sdc2_data"; }; - - sd-cd { - pins = "gpio91"; - }; }; sdc2_off: sdc2-off { -- 2.33.0.259.gc128427fd7-goog