Add device tree binding Documentation details for Qualcomm SM6350 pinctrl driver. Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx> --- Changes since v2: - Tweak the regex to match gpio0-gpio157 .../bindings/pinctrl/qcom,sm6350-pinctrl.yaml | 148 ++++++++++++++++++ 1 file changed, 148 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml new file mode 100644 index 000000000000..554992a681f3 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6350-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SM6350 TLMM block + +maintainers: + - Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx> + +description: | + This binding describes the Top Level Mode Multiplexer (TLMM) block found + in the SM6350 platform. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sm6350-tlmm + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + '#interrupt-cells': true + gpio-controller: true + gpio-reserved-ranges: true + '#gpio-cells': true + gpio-ranges: true + wakeup-parent: true + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + '-state$': + oneOf: + - $ref: "#/$defs/qcom-sm6350-tlmm-state" + - patternProperties: + ".*": + $ref: "#/$defs/qcom-sm6350-tlmm-state" + +$defs: + qcom-sm6350-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-7])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, atest_char2, + atest_char3, atest_tsens, atest_tsens2, atest_usb1, atest_usb10, atest_usb11, + atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21, atest_usb22, + atest_usb23, audio_ref, btfm_slimbus, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3, + cam_mclk4, cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, + cci_timer4, cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, + dp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0, gp_pdm1, gp_pdm2, gpio, + gps_tx, ibi_i3c, jitter_bist, ldo_en, ldo_update, lpass_ext, m_voc, mclk, + mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, mi2s_1, mi2s_2, + mss_lte, nav_gpio, nav_pps, pa_indicator, pcie0_clk, phase_flag0, phase_flag1, + phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15, + phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20, + phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26, + phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31, + phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9, + pll_bist, pll_bypassnl, pll_reset, prng_rosc, qdss_cti, qdss_gpio, qdss_gpio0, + qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, + qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, + qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss, + qlink1_enable, qlink1_request, qlink1_wmss, qup00, qup01, qup02, qup10, qup11, + qup12, qup13_f1, qup13_f2, qup14, rffe0_clk, rffe0_data, rffe1_clk, rffe1_data, + rffe2_clk, rffe2_data, rffe3_clk, rffe3_data, rffe4_clk, rffe4_data, sd_write, + sdc1_tb, sdc2_tb, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1, + tsense_pwm2, uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data, + uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1, + wlan2_adc0, wlan2_adc1, ] + + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + - function + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl@f100000 { + compatible = "qcom,sm6350-tlmm"; + reg = <0x0f100000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 157>; + + gpio-wo-subnode-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-subnodes-state { + rx { + pins = "gpio25"; + function = "qup13_f2"; + bias-disable; + }; + + tx { + pins = "gpio26"; + function = "qup13_f2"; + bias-disable; + }; + }; + }; +... -- 2.33.0
