Re: [PATCH] phy: qcom-qmp: add support for voltage and pre emphesis swing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Kuogee Hsieh (2021-08-24 16:29:35)
> Add voltage and pre emphesis swing tables so that voltage and

Is it "pre-emphasis"?

> pre emphsis swing level can be configured base on link rate.

This one is also different.

>
> Signed-off-by: Kuogee Hsieh <khsieh@xxxxxxxxxxxxxx>

Presumably

Fixes: aff188feb5e1 ("phy: qcom-qmp: add support for sm8250-usb3-dp phy")

> ---
>  drivers/phy/qualcomm/phy-qcom-qmp.c | 95 ++++++++++++++++++++++++++++++++-----
>  1 file changed, 82 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index 31036aa..52bab6e 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -1916,7 +1916,7 @@ static const struct qmp_phy_init_tbl qmp_v4_dp_tx_tbl[] = {
>         QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x11),
>         QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_BAND, 0x4),
>         QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_POL_INV, 0x0a),
> -       QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_DRV_LVL, 0x2a),
> +       QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_DRV_LVL, 0x22),

Is 0x22 the better "default"? Can that be described in the commit text?

>         QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_EMP_POST1_LVL, 0x20),
>  };
>
> @@ -3727,6 +3727,81 @@ static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy)
>
>         return 0;
>  }

Nitpick: Newline here please.

> +/*
> + * 0x20 deducted from tables
> + *
> + * swing_value |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
> + * pre_emphasis_value |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
> +*/
> +static const u8 qmp_dp_v4_pre_emphasis_hbr3_hbr2[4][4] = {
> +       /* p0    p1    p2    p3 */
> +       { 0x00, 0x0c, 0x15, 0x1b },     /* s0 */
> +       { 0x02, 0x0e, 0x16, 0xff },     /* s1 */
> +       { 0x02, 0x11, 0xff, 0xff },     /* s2 */
> +       { 0x04, 0xff, 0xff, 0xff }      /* s3 */
> +};
> +
> +static const u8 qmp_dp_v4_voltage_swing_hbr3_hbr2[4][4] = {

This looks the same as qmp_dp_v3_voltage_swing_hbr3_hbr2. Can that be
used?

> +       /* p0    p1    p2    p3 */
> +       { 0x02, 0x12, 0x16, 0x1a },     /* s0 */
> +       { 0x09, 0x19, 0x1f, 0xff },     /* s1 */
> +       { 0x10, 0x1f, 0xff, 0xff },     /* s2 */
> +       { 0x1f, 0xff, 0xff, 0xff }      /* s3 */
> +};
> +
> +static const u8 qmp_dp_v4_pre_emphasis_hbr_rbr[4][4] = {
> +       /* p0    p1    p2    p3 */
> +       { 0x00, 0x0e, 0x15, 0x1b },     /* s0 */
> +       { 0x00, 0x0e, 0x15, 0xff },     /* s1 */
> +       { 0x00, 0x0e, 0xff, 0xff },     /* s2 */
> +       { 0x04, 0xff, 0xff, 0xff }      /* s3 */
> +};
> +
> +static const u8 qmp_dp_v4_voltage_swing_hbr_rbr[4][4] = {
> +       /* p0    p1    p2    p3 */
> +       { 0x08, 0x0f, 0x16, 0x1f },     /* s0 */
> +       { 0x11, 0x1e, 0x1f, 0xff },     /* s1 */
> +       { 0x16, 0x1f, 0xff, 0xff },     /* s2 */
> +       { 0x1f, 0xff, 0xff, 0xff }      /* s3 */

Do these comments add any value? Can we drop them?

> +};
> +
> +static int qcom_qmp_v4_phy_configure_dp_swing(struct qmp_phy *qphy,
> +               unsigned int drv_lvl_reg, unsigned int emp_post_reg)
> +{
> +       const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> +       unsigned int v_level = 0, p_level = 0;
> +       u8 voltage_swing_cfg, pre_emphasis_cfg;
> +       int i;
> +
> +       for (i = 0; i < dp_opts->lanes; i++) {
> +               v_level = max(v_level, dp_opts->voltage[i]);
> +               p_level = max(p_level, dp_opts->pre[i]);
> +       }
> +
> +

Nitpick: Drop extra newline.

> +       if (dp_opts->link_rate <= 2700) {
> +               voltage_swing_cfg = qmp_dp_v4_voltage_swing_hbr_rbr[v_level][p_level];
> +               pre_emphasis_cfg = qmp_dp_v4_pre_emphasis_hbr_rbr[v_level][p_level];
> +       } else {
> +               voltage_swing_cfg = qmp_dp_v4_voltage_swing_hbr3_hbr2[v_level][p_level];
> +               pre_emphasis_cfg = qmp_dp_v4_pre_emphasis_hbr3_hbr2[v_level][p_level];
> +       }
> +
> +       /* TODO: Move check to config check */
> +       if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
> +               return -EINVAL;
> +
> +       /* Enable MUX to use Cursor values from these registers */
> +       voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
> +       pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
> +
> +       writel(voltage_swing_cfg, qphy->tx + drv_lvl_reg);
> +       writel(pre_emphasis_cfg, qphy->tx + emp_post_reg);
> +       writel(voltage_swing_cfg, qphy->tx2 + drv_lvl_reg);
> +       writel(pre_emphasis_cfg, qphy->tx2 + emp_post_reg);

This is copy/pasted from qcom_qmp_phy_configure_dp_swing() right? How
about making a function

static int
__qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy,
				  unsigned int drv_lvl_reg,
				  unsigned int emp_post_reg,
				  const u8 **voltage_rbr_hbr,
				  const u8 **pre_emphasis_rbr_hbr,
				  const u8 **voltage_hbr3_hbr2,
				  const u8 **pre_emphasis_hbr3_hbr2)

that does the same stuff but allows the tables to be different.

> +
> +       return 0;
> +}
>
>  static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
>  {
> @@ -3757,14 +3832,7 @@ static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
>
>  static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy)
>  {
> -       /* Program default values before writing proper values */
> -       writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
> -       writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
> -
> -       writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> -       writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> -
> -       qcom_qmp_phy_configure_dp_swing(qphy,
> +       qcom_qmp_v4_phy_configure_dp_swing(qphy,
>                         QSERDES_V4_TX_TX_DRV_LVL,
>                         QSERDES_V4_TX_TX_EMP_POST1_LVL);
>  }
> @@ -3885,6 +3953,9 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
>         writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
>         writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
>
> +       writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV);
> +       writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV);

Is this mentioned in the commit text? Is this fixing the sequence?
It doesn't look like we're adding tables.

> +
>         writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
>         udelay(2000);
>         writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> @@ -3896,11 +3967,9 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
>                         10000))
>                 return -ETIMEDOUT;
>
> -       writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV);
> -       writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV);
>
> -       writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
> -       writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
> +       writel(0x22, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
> +       writel(0x22, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
>
>         writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
>         writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux