[PATCH 1/2] dt-bindings: pinctrl: qcom: Add SM6350 pinctrl bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add device tree binding Documentation details for Qualcomm SM6350
pinctrl driver.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
 .../bindings/pinctrl/qcom,sm6350-pinctrl.yaml | 156 ++++++++++++++++++
 .../bindings/pinctrl/qcom,tlmm-common.yaml    |   2 +-
 2 files changed, 157 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
new file mode 100644
index 000000000000..e4d8b7a044e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6350-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM6350 TLMM block
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer (TLMM) block found
+  in the SM6350 platform.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6350-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sm6350-tlmm-state"
+      - patternProperties:
+          ".*":
+            $ref: "#/$defs/qcom-sm6350-tlmm-state"
+
+$defs:
+  qcom-sm6350-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-3])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, atest_char2,
+                atest_char3, atest_tsens, atest_tsens2, atest_usb1, atest_usb10, atest_usb11,
+                atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21, atest_usb22,
+                atest_usb23, audio_ref, btfm_slimbus, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3,
+                cam_mclk4, cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+                cci_timer4, cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3,
+                dp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0, gp_pdm1, gp_pdm2, gpio,
+                gps_tx, ibi_i3c, jitter_bist, ldo_en, ldo_update, lpass_ext, m_voc, mclk,
+                mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, mi2s_1, mi2s_2,
+                mss_lte, nav_gpio, nav_pps, pa_indicator, pcie0_clk, phase_flag0, phase_flag1,
+                phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15,
+                phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20,
+                phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26,
+                phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31,
+                phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9,
+                pll_bist, pll_bypassnl, pll_reset, prng_rosc, qdss_cti, qdss_gpio, qdss_gpio0,
+                qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
+                qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6,
+                qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss,
+                qlink1_enable, qlink1_request, qlink1_wmss, qup00, qup01, qup02, qup10, qup11,
+                qup12, qup13_f1, qup13_f2, qup14, rffe0_clk, rffe0_data, rffe1_clk, rffe1_data,
+                rffe2_clk, rffe2_data, rffe3_clk, rffe3_data, rffe4_clk, rffe4_data, sd_write,
+                sdc1_tb, sdc2_tb, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
+                tsense_pwm2, uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
+                uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
+                wlan2_adc0, wlan2_adc1, ]
+
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        pinctrl@f100000 {
+                compatible = "qcom,sm6350-tlmm";
+                reg = <0x0f100000 0x300000>;
+                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+                gpio-ranges = <&tlmm 0 0 156>;
+
+                gpio-wo-subnode-state {
+                        pins = "gpio1";
+                        function = "gpio";
+                };
+
+                uart-w-subnodes-state {
+                        rx {
+                                pins = "gpio25";
+                                function = "qup13_f2";
+                                bias-disable;
+                        };
+
+                        tx {
+                                pins = "gpio26";
+                                function = "qup13_f2";
+                                bias-disable;
+                        };
+                };
+        };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
index 3b37cf102d41..99975122a2ce 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
@@ -17,7 +17,7 @@ properties:
   interrupts:
     description:
       Specifies the TLMM summary IRQ
-    maxItems: 1
+    maxItems: 9
 
   interrupt-controller: true
 
-- 
2.33.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux