Re: [PATCH V5 3/7] arm64: dts: sc7280: Add QUPv3 wrapper_0 nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, Aug 12, 2021 at 12:42 AM Rajesh Patil <rajpat@xxxxxxxxxxxxxx> wrote:
>
> @@ -542,8 +561,305 @@
>                         #address-cells = <2>;
>                         #size-cells = <2>;
>                         ranges;
> +                       iommus = <&apps_smmu 0x123 0x0>;
>                         status = "disabled";
>
> +                       i2c0: i2c@980000 {

Not a full review of your patch (I think Matthias has already looked
in a bunch of detail), but can I also request that you add i2c and spi
aliases in your next spin (I think you have to spin this anyway,
right?) Add these under the "aliases" mode before the mmc ones (to
keep sort order good):

i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
i2c6 = &i2c6;
i2c7 = &i2c7;
i2c8 = &i2c8;
i2c9 = &i2c9;
i2c10 = &i2c10;
i2c11 = &i2c11;
i2c12 = &i2c12;
i2c13 = &i2c13;
i2c14 = &i2c14;
i2c15 = &i2c15;

...and these after:

spi0 = &spi0;
spi1 = &spi1;
spi2 = &spi2;
spi3 = &spi3;
spi4 = &spi4;
spi5 = &spi5;
spi6 = &spi6;
spi7 = &spi7;
spi8 = &spi8;
spi9 = &spi9;
spi10 = &spi10;
spi11 = &spi11;
spi12 = &spi12;
spi13 = &spi13;
spi14 = &spi14;
spi15 = &spi15;

The "Quad SPI" doesn't get an alias, but that's OK. It doesn't have a
well-defined number in the manual and it's fine to have it be
auto-assigned. It's really just confusing when there's something with
a well-defined number in the manual and it's a _different_ one in the
logs. ;-)

-Doug



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux