Add mdss and mdp DT nodes for sc7280. Signed-off-by: Krishna Manikandan <mkrishn@xxxxxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 85 ++++++++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 53a21d0..fd7ff1c 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -5,6 +5,7 @@ * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. */ +#include <dt-bindings/clock/qcom,dispcc-sc7280.h> #include <dt-bindings/clock/qcom,gcc-sc7280.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interconnect/qcom,sc7280.h> @@ -1424,6 +1425,90 @@ #power-domain-cells = <1>; }; + mdss: mdss@ae00000 { + compatible = "qcom,sc7280-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "ahb", "core"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; + assigned-clock-rates = <300000000>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem"; + + iommus = <&apps_smmu 0x900 0x402>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdp: mdp@ae01000 { + compatible = "qcom,sc7280-dpu"; + reg = <0 0x0ae01000 0 0x8f030>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "nrt_bus", "iface", "lut", "core", + "vsync"; + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>; + assigned-clock-rates = <300000000>, + <19200000>, + <19200000>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + status = "disabled"; + + mdp_opp_table: mdp-opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-380000000 { + opp-hz = /bits/ 64 <380000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-506666667 { + opp-hz = /bits/ 64 <506666667>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sc7280-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>; -- 2.7.4