Re: [PATCH v3] Bluetooth: btusb: Add support different nvm to distinguish different factory for WCN6855 controller

[tjiang@xxxxxxxxxxxxxx]

marcel:
  could you help review this patch ? thank you.
tjiang

On 2021-08-12 16:50, Zijun Hu wrote:
> From: Tim Jiang <tjiang@xxxxxxxxxxxxxx>
>
> we have different factory to produce wcn6855 soc chip, so we should
> use different nvm file with suffix to distinguish them.
>
> Signed-off-by: Tim Jiang <tjiang@xxxxxxxxxxxxxx>
> ---
>  drivers/bluetooth/btusb.c | 60 
> ++++++++++++++++++++++++++++++++++++++++-------
>  1 file changed, 51 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index b1a05bb9f4bf..d7b4e0f1c3e3 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -4013,6 +4013,9 @@ static int btusb_set_bdaddr_wcn6855(struct 
> hci_dev *hdev,
>  #define QCA_DFU_TIMEOUT		3000
>  #define QCA_FLAG_MULTI_NVM      0x80
>
> +#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200
> +#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211
> +
>  struct qca_version {
>  	__le32	rom_version;
>  	__le32	patch_version;
> @@ -4044,6 +4047,7 @@ static const struct qca_device_info
> qca_devices_table[] = {
>  	{ 0x00000302, 28, 4, 16 }, /* Rome 3.2 */
>  	{ 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */
>  	{ 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */
> +	{ 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */
>  };
>
>  static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 
> request,
> @@ -4198,6 +4202,39 @@ static int btusb_setup_qca_load_rampatch(struct
> hci_dev *hdev,
>  	return err;
>  }
>
> +static int btusb_setup_qca_form_nvm_name(char **fwname,
> +					int max_size,
> +					struct qca_version *ver,
> +					char *factory)
> +{
> +	/* if boardid equal 0, use default nvm without suffix */
> +	switch (le16_to_cpu(ver->board_id)) {
> +	case 0x0:
> +		/* we add suffix factory to distinguish with different factory. */
> +		if (factory != NULL) {
> +			snprintf(*fwname, max_size, "qca/nvm_usb_%08x_%s.bin",
> +				 le32_to_cpu(ver->rom_version),
> +				 factory);
> +		} else {
> +			snprintf(*fwname, max_size, "qca/nvm_usb_%08x.bin",
> +				 le32_to_cpu(ver->rom_version));
> +		}
> +		break;
> +	default:
> +		if (factory != NULL) {
> +			snprintf(*fwname, max_size, "qca/nvm_usb_%08x_%s_%04x.bin",
> +				le32_to_cpu(ver->rom_version),
> +				factory,
> +				le16_to_cpu(ver->board_id));
> +		} else {
> +			snprintf(*fwname, max_size, "qca/nvm_usb_%08x_%04x.bin",
> +				le32_to_cpu(ver->rom_version),
> +				le16_to_cpu(ver->board_id));
> +		}
> +		break;
> +	}
> +}
> +
>  static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
>  				    struct qca_version *ver,
>  				    const struct qca_device_info *info)
> @@ -4206,19 +4243,24 @@ static int btusb_setup_qca_load_nvm(struct
> hci_dev *hdev,
>  	char fwname[64];
>  	int err;
>
> -	if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
> -		/* if boardid equal 0, use default nvm without surfix */
> -		if (le16_to_cpu(ver->board_id) == 0x0) {
> +	switch (ver->ram_version) {
> +	case WCN6855_2_0_RAM_VERSION_GF:
> +	case WCN6855_2_1_RAM_VERSION_GF:
> +		if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
> +			btusb_setup_qca_form_nvm_name(&fwname, sizeof(fwname), ver, "gf");
> +		} else {
>  			snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
>  				 le32_to_cpu(ver->rom_version));
> +		}
> +		break;
> +	default:
> +		if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
> +			btusb_setup_qca_form_nvm_name(&fwname, sizeof(fwname), ver, NULL);
>  		} else {
> -			snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x_%04x.bin",
> -				le32_to_cpu(ver->rom_version),
> -				le16_to_cpu(ver->board_id));
> +			snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
> +				 le32_to_cpu(ver->rom_version));
>  		}
> -	} else {
> -		snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
> -			 le32_to_cpu(ver->rom_version));
> +		break;
>  	}
>
>  	err = request_firmware(&fw, fwname, &hdev->dev);